Question about rebuilding the motor..
 

Hey i just picked up a 87 FC and i was planning on rebuilding the motor to handle 100-150 shot of nos.. I was wondering wat all do i need motor wise for it to handle such a high shot of nos.. Im fairly new to Rotarys so bare with me.. Thanks -Justin

this is about the only place i would suggest 3mm seals, since obviously the motor will not be built for the long term and a large streetport and keep it a wet shot.

Hey, here is a link to another post that will give you plenty of reading material.

https://www.rx7club.com/showpost.php...73&postcount=3

Also don't take offense as you will get flamed for not searching.

Mike

Hey thanks, I dont know what i was thinking i forgot about that little search button.

You may want to check over at Nopistons for Judge Ito. He's a fairly well known rotary builder and loves n/a and nitrous powered dragsters.
He has nitrous coursing through his vanes and posts on the nopistons forum semi-frequently. Search for his old posts as he shares his engine building knowledge rather freely.

Good luck,
Ben Martin

Thanks alot for the help.