pressure switch! PLEASE!
 

Ok, I need someone with an 88TII or if possible a 10th AE to tell me according to their car what color wires go were at the connection on the pressure switch! It has 4 wires, the colors are BR/R-BR/W-SOLIDBLACK-B/W! Due to pulsation damper fire my connectors and wires were melted and Im haveing to rewire it. I just don't know which holes in the new connector to put the wires!

P.S. Any help would be greatly appreciated, Oh and I already searched the topic! :)

Anyone? Yes Im refering to the Pressure sensor on the passenger side shock tower, not the atmospheric pressure sensor! Please! This would be a huge help!

;)

you can get the 88 factory service manual and wiring diagrams online at www.fc3s.org and a few other places.

I already have the FSM, The problem is that what I can still see off the burnt connection is that the wires are in a diffferent order on the connector as opposed to were the 88 FSM states they should be! Thats why Im asking if anyone else has seen this mixup on there sensor, oh and every time I plug mine in according to what the FSM says,I blow my EGI fuse! My car is a 10th AE :)

Will someone please walk out to their car "88TII or 10TH AE" and tell me what color their wires are going into the connector and how they are arranged in the block!:(

1. You look at the back of the plug where the wires go in.
2. The clip for the plug is at the top.
3. BW in the top left.
4. Black in the top right (early 87 would be BrB)
5.BrR in the bottom left.
6. BrW in the bottom right.

It's too dangerous to go outdoors this time of night. Ain't gonna do that.

Thanks!!!!!!:D