Power door lock problem
 

ok, i'm no electronical wiz so i need some help. my power door locks have decided to stop working when locking. when i unlock the car both doors unlock. when i push the lock down after entering the car it normally locks the pasenger side too...now it won't. where should i start to look to see if i can fix it? thanks!

Either the switch in the drivers door is bad or the motor in the passengers door is bad.

You'll need to check both, but I would start with the switch in the drivers door as chances are it is dirty or damaged.

I fixed that by replacing the power door lock motor on the passenger side.

Jarrett

thanks guys!
ahh...the numerous quirky problems of an FC :-/

Shoot some contact cleaner into the driver's side lock position switch.
I get it in the electrical Dept at Home Depot.
It's also good for TPS plungers, logicon sliders, stereo controls, etc.