RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   plug question (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/plug-question-819366/)

DRFT_HRD Feb 11, 2009 07:07 PM

plug question
 
i need to know what the ovalish white plug on pass side near the afm is and what it goes to. and would not having whatever it goes to keep my car from running?

misterstyx69 Feb 11, 2009 07:35 PM

sounds like an Injector resistor pack Plug.but you would be better off to Post a Pic of it somehow.Also Info on the year and Type of car(N/A or TII.)Otherwise it's Just a Guessing game.

DRFT_HRD Feb 11, 2009 08:02 PM

lol i feel dumb its a s4 t2.
and here is a pic of it:
http://img.photobucket.com/albums/v5...ectFC3S030.jpg

misterstyx69 Feb 11, 2009 08:25 PM

That is It.Injector resistor pack plug.
I'm doing a Swap,so I can't tell you too much more info on How the TII Stock setup is,and how it Connects the Resistor Pack in,on a TII Harness,Sorry..But,BUMP and lets see from Someone else,shall we?..

DRFT_HRD Feb 11, 2009 08:37 PM

sweet that might explain why my car wont start lol.

misterstyx69 Feb 11, 2009 08:46 PM

.I am assuming that you have an S4 TII Correct?Put up MORE info.Like what Year of TII...What are you running for ECU(N332 0r 333),Injectors(Lo or HI)..Is it a SWAP?.are you using an N/A harness or a TII harness?..
be amazed,you may be able to get the car started with MORE info!..(zzooom,zoom???)

Black Knight RX7 FC3S Feb 11, 2009 09:11 PM

if your car is made before 6/87 then it uses the resitance pack, after that date it doesnt uses it. This is only true if nobody didnt do anything major to the car, like a engine swap, or injector swap.

DRFT_HRD Feb 11, 2009 11:44 PM

my car is a 88 but most everything in it is 87 minus the motor which came from another 88. i am not sure if the injectors are high imp or low imp they are red and look like the same ones that come in a s4 n/a and my ecu is a n332.

wvumtnbkr Feb 12, 2009 08:17 AM

If the tab is in the middle of the injector, you need the resister pack. if it is offset, you don't need the resister pack.

I don't think you need this to start the car, but without it (if you need it) it can damage the ECU.

HAILERS Feb 12, 2009 08:42 AM

2 Attachment(s)
It powers the fuel injectors.

The center contact on that plug feeds the resistors in the solenoid resistor, and the power feeds out the resistors to the four OTHER contacts in that plug, and the wires on those other four contacts lead you to the fuel injectors.

Ignore the part in the first jpg that is lined in red. Not applicable.


All times are GMT -5. The time now is 08:40 AM.


© 2026 MH Sub I, LLC dba Internet Brands