One wire left!! PLEASE HELP!!!
 

I just got done with my motor swap and setup but I have a wire that I forgot to mark and I need help to find out where it goes. It is located on the drivers side near the starter in the engine bay. It looks like a black box with a metal tabb on the side with the screw hole in it. I hope someone knows what I am talking about. Please help!

IF that's what I"m thinking of (A small black box, about an .75" square and about .25" thick), then its a capacitor to smooth out the (tach?) system I think. Just ground that out, by finding a convient screw, and running it through that screwhole.

Are you refering to this part here??

http://www.phantomhp.com/pics/part.jpg

Mike

Yeah, That's it. The wire that connects to it is coming from the harness with the starter wires.

Well, I am not 100% but I believe it would plug into that part of the harness and then bolt up on one of the tranny bolts.

I havent messed with that wire in awhile so not totally sure. Just had this spare one sitting in the garage with the rest of the parts.

Mike

Ground it to the top of the engine near the clutch slave. I believe it smooths out the signal from the oil pressure sending unit.

Thanks guys.