Oil injector question.
I have redone everything in the engine compartment while installing my Haltech. I was wondering do the oil injectors just get hooked up to a normal vaccum source like the fuel pressure regulator does? And no one tell me to just run premix!;) Thanks for any help you can offer.
Brian |
yeah it is just a regular vac(or boost source) source,,i am going through mine right now,,i replaced teh oil and vac lines,,they were all cracked to hell
|
Thanks that cleared up alot vuccum line headaches I was having, knowing that I went from a whole shit load of vaccum lines to about 5 that I now have to worry about.
|
Just use the stock vac line and spider, it connects to one of the three nipples on the firewall side of the plenum. New ones would be a good idea depending on cost.
|
On an 87 TII, the oil injectors are NOT hooked up to a vacuum source, but rather a clean air source. This is supplied by the larger nipple on the throttle body facing the firewall. It goes to a port in front of the throttle plates, which never has vacuum on it, only boost. I don't know what happens if there is vacuum on this line, I just know there is no vacuum on the stock system.
Irv, Keith's dad :cool: |
So as long as I connect it to where it origionally came off of it will be fine. Does it matter that I have all the other nipples on the throttle body blocked off?
|
All times are GMT -5. The time now is 04:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands