Oil injector blocking
 

when you block off you MOP do you guys use somthing to block off the oil injector holes or do just leave the old ones there to block it up? :p:

Pull oil injectors and stuff generic 10mm x 1.25 bolts to plug the holes up. :)


-Ted

thanks for the help.. I searched ,but I guess it hasnt really been talked about

http://fc3spro.com/TECH/FAQ/premix.html

:)


-Ted

really good read ted, thanks for the link!

does anyone have the specs for the block off plate? or should it jsut be an on the fly sort of thing?

i was about to ask how hard it is to line these screws up http://www.yx4.net/uploads/df7f8f7006.jpg But then i read up on pre mix injection and makes alot of sense to go with the premix

you can just get some thick guage aluminum sheet or bar and trim it and drill the holes.

why did somone bring one of my old threads back from the dead

Just install four common bolts in place of the four banjo bolts for the oil lines. Done.