RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Newbie needing HeLp!!!!! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/newbie-needing-help-17040/)

marlaman 08-23-01 02:38 AM
Newbie needing HeLp!!!!!
 
I need to know how to adjust the Idle speed on a 1987 n/a because there is a tendancy of this car to idle down quite a bit to the point where it dies---approx 6-500 rpm's i'm just looking to boost it up to the normal 750-800 range-(CORRECT?????) and i just purchased this car for 800 bucks! body is in damn near perfect condition so i got a steal!!! anyway help would be appriciated. thanks much. please e-mail me at marlaman@hotmail.com thanks again

Felix Wankel 08-23-01 02:53 AM
Pull the rubber plug off the top of the intake and turn the screw.

HAILERS 08-23-01 10:30 AM
After you pull the rubber and screw......you could download the factory manual from http://www.iluvmyrx7.com You'll find the manual under *technical*. Its an 88 but will serve you just as well. You might elect to just download the section 4A that deals with the intake and setting the idle. Its FREE!

Mykl 08-23-01 10:37 AM
Originally posted by HAILERS
After you pull the rubber and screw......you could download the factory manual from http://www.iluvmyrx7.com You'll find the manual under *technical*. Its an 88 but will serve you just as well. You might elect to just download the section 4A that deals with the intake and setting the idle. Its FREE!
Do you know where I could find a FSM for an '89-'91?

I have one for a '93 and I'm going to download the one for the '88, but neither do me much good.


All times are GMT -5. The time now is 11:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands