Need help: Turbo NA boils coolant and runs hot
i trubo my n/a rx7 and my water tempature is high and it bubbles when i frist start it even when its not hot i wont to know if anyone who has trubo there n/a had the same problem and if they could help me figure out the problem thanks francisco
|
possablity of coolant seals going bad in the motor?
|
i second that
|
yeah if you start the car (when cold) and there is presure under the radiator and there is white smoke ....its a coolent seal
|
rebuild time.... been there played that song... but on the bright side there is a good chance you can keep your rotor housing. my front side housing crapped out on my car. the wall thickness corrodes away. if it was a rotor housing you might have gobbled an apex too. anyways look for your options rebuild it yourself or get another motor.. OR TURBO TIME !!!!!!!!! WEEEEEEEEEEEEEEEEEE later
|
Do a search for the "bubble test". This will allow you to make a reasonable assumption that your water seals are bad.
However, if you are not loosing any coolant, then your o-rings are fine. I have a cooling troubleshooting guide at http://www.aaroncake.net/rx-7/cooling.htm Also, pick a better thread subject next time. "need help!!" is useless, and quickly gets buried. I have updated your thread with a better title. |
Thank you everybody for your responses, and thank you aaron for your link and thread save. I will update as soon as i find the problem.
Thanks, Francisco |
All times are GMT -5. The time now is 10:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands