Need help
 

I just got my car all put back together. The engine is a rebuilt engine with a street port by pettit. I have a FIMC. Only have 550 cc injector for the primany side. I have an aftermarket fuel pump with aftermarket fuel pressure regulator that is set at 33psi. I have removed the smog pump, egr valve, air control valve, and no more power steering pump, and replaced power steering with manuel steering. FOr the BAC valve ive left it on the manifold because i cant find a plate for it. My problem is this, i have started the car but car will not idle. i have not adjusted timing yet so i dont know if the timing is even good. but other then that is there anything else that should worry about. i can keep the car on by having my foot on the gas peddle. Any help will be appreciated. thanks again guys.

When it starts up does it immediately stall? Is your AFM plugged in? Maybe a big vac leak. Does it idle after it's warmed up?

ive only got it to stay on without the gas peddle twice but the idle was at like 2000 rpm. i started to drive it and it just stalled out whenever i didnt keep my foot on the gas peddle.