Need Blinker Assistance - I hear the relay, but no blinker.
 

Symptom: I hear the blinker relay click on and off, but the blinkers do not come on. Not the dash lights or body-blinkers.

Premise: There were a few wires hanging near the pedals/stearing column that I zip-tied to the stearing columns.

Any Ideas?

Kent

You need a refill

http://kalecoauto.com/index.php?main...&products_id=6

If the CPU is clicking, but the lights are not working, you have a bad CPU flasher board or all the lights are burnt out.

The input from the switch is in the same plug as the output to the lights.

I do have rebuilt flasher boards for the CPU on my webstore, or any S4, S5 or S6 RX-7 and the MX-3 has the same flasher board.

nice man....Just what I needed....do the have a performace resevior for that? lol

Icemark, are we talking cold-solders are something more severe? I had the CPU out a few years ago resoldering everything...

Yeah, probably cold solder joints, but it could also be bad/old relays

Are we talking standard flasher relays, or cpu mazda rare relays?

The relays are Omron, found at Digikey. I don't remember the number.

And no they are not standard flashers.

Stuff's not cheap: http://www.digikey.com/scripts/DkSea...S&Cat=35455563

I'll pull the CPU this weekend and post the P/N's for ref.

Was fuse. Frayed wire on the driverside headlight assembly shorted.