My new turbo setup coming along, pictures..
3 Attachment(s)
From SSA crap to a real setup.
|
looks good...... but i noticed the tmic is still there...are you changing that as well????
|
Looks great man !
How hard is it to plumb that WB back into the exhaust? James Edit - Can you break down teh costs? James |
Originally Posted by Wankel7
Looks great man !
How hard is it to plumb that WB back into the exhaust? James Edit - Can you break down teh costs? James |
Originally Posted by t04tii
You'll have to ask 1Revvin7 that. Its at his shop.
Oh, I thought you were doing the work. So what is the total cost for joo:) |
That wastegate is open dumped under the passanger side of the car, take a look at that undercar pic and follow where the pipes going! Looks like it comes out right at the passanger wheel well, that's gonna be loud!
|
tubular.
|
Did you have to take any special steps to restrict oil flow when improving upon the oil inlet on the turbo? Is the line the same ID?
ps Every time I see those exhaust manifolds I am amazed by how nice they look, and how frickin huge they are :) |
Its just a -4an feed line, no restrictor. Works just fine on fc oil pressure.
|
I like the WG dump that looks kool, hopefully u could share a vid when its done. I wanna hear it.
|
Originally Posted by Wankel7
Looks great man !
How hard is it to plumb that WB back into the exhaust? James Edit - Can you break down teh costs? James Its not that hard, just takes more time, which obviously costs more. That dump tube took all of 10 minutes. |
1 Attachment(s)
:suitdance
|
mmMMMmmm pretty... *drools* the housing is nice too... what's with the Lamborghini bag?
|
Originally Posted by takahashiRyosukeFC3S
mmMMMmmm pretty... *drools* the housing is nice too... what's with the Lamborghini bag?
|
1 Attachment(s)
Originally Posted by vipers
looks good...... but i noticed the tmic is still there...are you changing that as well????
|
I have nothing constuctive to say except Revn has my business when i am going to upgrade my turbo and supporting mods. (been talking with im anyway about this for quite a while and he is very patient with my stupidity)
thank you and keep us updated on your project. looks beautiful so far, Ryosuke |
Originally Posted by t04tii
He also installed a W/A setup.
Good Luck with the manifold, I almost bought one too; but went with an http://www.alienauto.com/ https://www.rx7club.com/attachment.p...hmentid=136563 https://www.rx7club.com/attachment.p...hmentid=136561 |
Originally Posted by t04tii
He also installed a W/A setup.
It is well accepted and proven that is the least effective place to plumb it into. Other than that, looks good so far. I love those Alien auto manifolds btw. Functional works of art. The fabricators username is Bad2ndGen or something like that. The one he fabbed up on his car is crazy. Also he has one of the nicest fc's on this board. |
Originally Posted by RX-Heven
I love those Alien auto manifolds btw. Functional works of art.
The fabricators username is Bad2ndGen or something like that. The one he fabbed up on his car is crazy. Also he has one of the nicest fc's on this board. BTW - Your manifold is not bad either, I actually called your guy\welder before I bought the alienauto one :) |
Originally Posted by RX-Heven
Why did you plumb it in before the ic?
It is well accepted and proven that is the least effective place to plumb it into. Other than that, looks good so far. If money were not an issue almost everything on this car would be different. |
How is one position vs. another more cost effective in this case?
What does a few extra feet of line cost? $0.50 |
Originally Posted by KNONFS
I know is your car, but why will you butcher it like that? I am all good for removing stuff, but I don't dig cutting the frame\sheet metal like that :(
Good Luck with the manifold, I almost bought one too; but went with an http://www.alienauto.com/ https://www.rx7club.com/attachment.p...hmentid=136563 https://www.rx7club.com/attachment.p...hmentid=136561 James |
Originally Posted by RX-Heven
How is one position vs. another more cost effective in this case?
What does a few extra feet of line cost? $0.50 The price of methanol. What is that white coating? |
Originally Posted by Wankel7
Wow, I have never seen that manifold! Outstanding. So you will be able to retain your ABS ?
James That's not my car, its Comitatus :) My 91 does not have ABS, on any case, the turbo sits way up front. My pics should be up soon :git: |
Originally Posted by t04tii
What is that white coating?
|
All times are GMT -5. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands