RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   My Greddy FMIC Install Pics (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/my-greddy-fmic-install-pics-519916/)

Houstonderk 03-20-06 07:29 PM

2 Attachment(s)
Everybody seems to put the intercooler there but is the piping in the way of the headlights? I mean people who keep the stock ones. heres were i put mine so i can keep the headlight motors in the same place.

ilike2eatricers 03-20-06 07:40 PM

^ headlights are not affected at all by the greddy kits.

edomund 03-20-06 08:02 PM

^
yeah my lip is fucked up :) it's sits like 4" off the ground and before I got used to it being so low I scraped it on everything. I'm going to fix it and paint it after I graduate from Sac State in May, I commute to Sacramento so it would be pointless to paint before then.

houstonderk I had to cut the hell out of the RE kit because the intercooler is so big. I had to take all the lips (mouth, fog light hole, brake ducts) almost flush with the bumper.
I also ditched all the bumper support stuff.

Houstonderk 03-20-06 08:04 PM

No bumper support. Don't get in a fender bender.

Terrh 03-20-06 08:08 PM

headlights, a/c, p/s and battery aren't affected by the greddy VSPL kit.

bumper support is - but you can keep it, you just have to trim the bottom rail off of it, weakening it by maybe 50-60%.

edomund 03-20-06 08:17 PM

mo
 
2 Attachment(s)
ilike2eatricers I did notice much better response as well. My BOV is also noticeably louder, lol. I just don't reach 14PSI I guess I'll try again once I get the greddy TB elbow in the mail.

BTW here are more pics.
This is with my BOV welded up and my mesh installed to protect my intercooler from rocks and crap.

edomund 04-01-06 10:42 PM

pretty much finished
 
4 Attachment(s)
I got my Greddy TB Elbow, looks much better than PVC :)

I also got a new K&N filter and finally mounted my AFM with angle bracket.

Here's some pics

ed

edomund 04-01-06 10:44 PM

I also relocated my radiator overflow, near the pass. shock tower, to move more air through the FMIC

ilike2eatricers 04-02-06 04:19 PM

looks good!

edomund 04-02-06 05:02 PM

Thanks.

BTW with the Greddy TB elbow no more boost leak. Pulls boost until redline!

KingCobraV9 04-02-06 06:43 PM

where did you get that kit from?

edomund 04-02-06 07:13 PM

I got it from a forum member. It was new he never ended up installing it so I bought it from him.

It's the Greddy V-spec kit. You can get it from rx7store.net, Jason has the best price on it new, $940.

It takes quite a bit of fabrication to get it to fit right on the 87-88 but it is one of the cleanest most complete kits out.


All times are GMT -5. The time now is 09:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands