RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   my engine problems, continued. (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/my-engine-problems-continued-300666/)

yozsi 04-29-04 11:19 AM

my engine problems, continued.
 
ok, like i said before i aquired a 87 fc n/a that has 93000 miles. it has been sitting for a while and has absolutely no compression on both rotors. people said that it might be flooding. i took out the plugs and saw thay they were wet. i unplugged the fuel pump and egi fuse. did the atf treatment and put the plugs back in, still no compression. i highly doubt that the motor would be dead because all of the fluids looked a-ok and the car has been taken care of. i have taken the exhaust manifold off to look for the apex seals and cant even find em??? i can even find the tips of the rotor????? what i do find is like 3 inch wide tips and not a pointy edge like what its supposed to be. thanks for reading my little rant.

yozsi 04-29-04 11:28 PM

anyone?

sa22c_Drifter 04-30-04 12:15 AM

Are you checking the compression correctly?. Are you sure you did the ATF treatment right?

yozsi 04-30-04 12:53 AM

yes, i did everything right. shen i take the leading plugs out i dont even hear any wooshing or anything when i crank, and i know the engine is turning becase i can see the rotors pass by in the exhaust ports.

yozsi 04-30-04 12:54 AM

i dont even know why i said that, i already pulled the enigine to pull it apart.

sa22c_Drifter 04-30-04 01:02 AM

lol. Well Im guessing that if you don't hear any whoosh then there is definetly no compression.

ERAUMAZDA 04-30-04 01:06 AM

tell us your findings


All times are GMT -5. The time now is 11:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands