infinidreams

I need some info on lazy eyes/sleepy eyes the info i need is um how do u do it?
been tryin to figure it out but i jus cant figure it out please help

<MaTT

fc3sfreek

iTrader: (6)

the way i did it was to unplug the headlight motors (big white plug in the front of engine bay) and then reach under the front bumper and u'll feel a little ****, u turn that **** and it slowly lifts up the headlight. but it stays in the same position wheter the lights are on or off

vipers

iTrader: (8)

no need to unplug the headlight motors........ just pull the main headlight retractor fuse in the main fuse panal under the hood.



note.... hope it doesnt happen, but prepare for some major flaming!

1987RX7guy

iTrader: (3)

Unless its only during the day you're in for some tickets. Stupid people that do this have complete ignorance for most local laws that mandate a certain headlight height. So cops will think your **** is broken(guess why, because it looks so...) and will give you a fix it ticket. Stop following ****** trends.


Its completely worthless to do during the day so put Lazy Eye Head Lamps+Moron+Day=stupid looking car and bad image for the rest of us 7 owners.


SHOW SOME CLASS!

REnder

all you have to do is search and you will find all the info you need on how to do it. The best way to do it is to install pivot pop-up headlight controller ( http://racingdimension.com/index.asp...ROD&ProdID=275 ) that way you can have them sleepy eye when your drivin during the day and normal at night.

But SEARCH if you don't want to get flammed.

bloomer

i think it looks good.i dont know what your talking about, i have been driving around for 2 years with sleepie eyes and have never been pulled over ............maybe you should show some class

Diavolo

if you wanted to, you dont need to unplug a motor how about this;
just pull out the fuse (fuse box in the engine bay) and manually raise them up using the **** underneath the front bumper like fc3sfreek said.

im trying to remember which fuse it is, i think its the third one over, and its pink labeled 'retractor' or something like that, if that doesnt make since i'll double check, i just dont feel like walking into the garage and popping my hood right now.

1987RX7guy

iTrader: (3)

In the greater texas area there are headlamp height laws. Most other states have them too, maybe you suck too many pig *****?

topaz

I think sleepy eyes are cool... its a matter of taste. Sure I dont use them all the time. I am sure that when they are mid open they allow more air to come into the engine bay, something useful after all.

I have a friend of mine, who made a small circuit: It has two switches. Switch One, and Switch Two.

Switch One controles mode. I mean:
Mode A: stock function with the stock switches.
Mode B: System goes to Sleepy Eyes Mode.

When Switch One is at Mode B, the light motors operate only with Switch Two. Its time I press Switch Two, the motors go up one step. Etc. From full closed, to full open, there are about 12-14 steps!

I hide the panel with the Switches (one and two) right aside from the -hood open- switch. Its great!

1987RX7guy

iTrader: (3)

If you've seen the headlight assemblies you'd know they have a rubber seal around the front and the bezels pretty much come close to the sides. Not even to mention the fact that there are no direct/unrestricted paths to the engine bay.

luckyse7en

im sorry fellas, but I usually dont do this but i think this rx7 guy is a ****** douche, your talkin about class... it sounds to me like your tryin to start a fight w/ your own kind, i bet you have some **** on your car that people wouldnt agree w/, opinions are cool, but you need to go somewhere with that ****

oh and by the way i live in texas and have lazy eyes on my car iv'e never ever been bothered by the laws

SonicRaT

iTrader: (6)

Just because they don't bother you, doesn't mean it isn't true (which infact, it is). Regardless, I seriously doubt you'll find one peice of 'shady' (read, perhaps rice) on his car, he's generally pretty avid against such things. That, and he's right for the most part.

Sleepy eyes look broken, or they make the car look retarded (literally).

topaz

If you've seen the headlight assemblies you'd know they have a rubber seal around the front and the bezels pretty much come close to the sides. Not even to mention the fact that there are no direct/unrestricted paths to the engine bay.

Yes I know. Rubber has been cut, I forgot to mention. No need for direct/unrestricted paths to the engine bay to get some more air there, trust me.

BTW have you seen the airflow some aftermarket light covers have? You can do the same thing: Use sleepy eyes, cut the plastic above the light and between the metal cover, and create a air path to the air filter (cone, etc).

Sleepy eyes look broken, or they make the car look retarded (literally).

Opinions are like a$$holes. Everybody has one. (no offence) You can also say that a TurboII looks retarded when the rear wing is removed...

NZConvertible

I'm sure you have never actually looked to see how this air gets into the engine bay. If you had, you would've seen that it can't.

iceblue

Ummm there is a steal wall behinde the light. :-/

Aaron Cake

iTrader: (1)

We've covered this many, many times before, and it almost always turns into a flame war.

Please search for "lazy eyes", "sleepy eyes" or "pivot controller". You'll find all the info you need to break your headlights.

Thread closed.