My BP car w/ RE FMIC kit
Well i just got the car off the ground as far as getting it ready to run at the track, its a BDC build Spec M half bridgeport, equipped with an E6k and other misc goods, the motor is very tight, its only got 2300 miles on it and feels good on 7psi, i scored the infamous RE Amemiya kit that everyone seems to have trouble with installing. with some tools and torch layin around i got it done in two nights, the core itself is a smaller GReddy-style core, i just got it installed, so the pipes look kinda rough and in need of a GReddy BOV, this dsm one sux, im getting the pipes ceramic coated so that help with heatsoak and add to the bling factor, on an 75 deg nite, cruising air temps were about 90deg so i have room for improvement, and my before and after coolant temps went up about 2 deg. any questions about the car feel free to ask..here are a few pix of the car and intercooler pix.
http://slammedblk7.cyberosity.com/9-16-04/DSC00072.JPG http://slammedblk7.cyberosity.com/9-16-04/DSC00073.JPG http://slammedblk7.cyberosity.com/9-16-04/DSC00074.JPG http://slammedblk7.cyberosity.com/87...ture%20105.jpg http://slammedblk7.cyberosity.com/87...ture%20103.jpg http://slammedblk7.cyberosity.com/87...ture%20099.jpg Video of it idling, it was kinda cold still RIGHT CLICK AND SAVE AS..... http://slammedblk7.cyberosity.com/9-16-04/MOV00071.MPG |
Not bad, but the piping is a little confusing...
|
no doubt the piping in not like any thing i have seen. it crazy but i bet your car is fast as hell man , cant wait til i get my first RX-7 as my first car ever that i have owned. sweet car man need some fresh paint on that thing now , by the way what rims are those and what size.
|
just saw the vid.. looks very nice.. should be a nice sleeper.. now you just need to make a vid of the car boosting :D
Frank |
The piping is bent like that so you can fit a strut bar.
Either way, nice sleeper. |
are those dsm wheels?
|
very cool! I'm thinking of getting an old school trust ic that has piping like that. Did you say it was a bitch installing? Or is it just the one you have.
Originally Posted by gsracer
are those dsm wheels?
ok I feel retarded because it seems like everyone is talking about dsm this and dsm that, what the hell is dsm???? Thanks. |
Originally Posted by hondahater
very cool! I'm thinking of getting an old school trust ic that has piping like that. Did you say it was a bitch installing? Or is it just the one you have.
ok I feel retarded because it seems like everyone is talking about dsm this and dsm that, what the hell is dsm???? Thanks. |
If I may speak for him, those look like 5Zigen FN01R-Cs, that have been polished.
|
ahhhhh and what exactly does dsm stand for???
|
Originally Posted by hondahater
ahhhhh and what exactly does dsm stand for???
|
Sounds secksi.
|
the rims look like enkie too me :P
|
FN01-RCs in chrome?
|
Sounds fucking badass, im hoping that my N/A bridgeport will sound like that.
-Kim |
Originally Posted by Slammedblk7
Well i just got the car off the ground as far as getting it ready to run at the track, its a BDC build Spec M half bridgeport, equipped with an E6k and other misc goods, the motor is very tight, its only got 2300 miles on it and feels good on 7psi, i scored the infamous RE Amemiya kit that everyone seems to have trouble with installing. with some tools and torch layin around i got it done in two nights, the core itself is a smaller GReddy-style core, i just got it installed, so the pipes look kinda rough and in need of a GReddy BOV, this dsm one sux, im getting the pipes ceramic coated so that help with heatsoak and add to the bling factor, on an 75 deg nite, cruising air temps were about 90deg so i have room for improvement, and my before and after coolant temps went up about 2 deg. any questions about the car feel free to ask..here are a few pix of the car and intercooler pix.
http://slammedblk7.cyberosity.com/9-16-04/DSC00072.JPG http://slammedblk7.cyberosity.com/9-16-04/DSC00073.JPG http://slammedblk7.cyberosity.com/9-16-04/DSC00074.JPG http://slammedblk7.cyberosity.com/87...ture%20105.jpg http://slammedblk7.cyberosity.com/87...ture%20103.jpg http://slammedblk7.cyberosity.com/87...ture%20099.jpg Video of it idling, it was kinda cold still RIGHT CLICK AND SAVE AS..... http://slammedblk7.cyberosity.com/9-16-04/MOV00071.MPG Do you guys have emissions in TX? Ya'll bridgeporting street cars in Texas, makes me want to move upthere :D Good Luck with it! |
he polished the fno1's. they used to be bronze (sig pic)
edit: i just watched the video. you got a little exhaust leak? :) its louder from the front of the car lol |
Originally Posted by jacobcartmill
edit: i just watched the video. you got a little exhaust leak? :) its louder from the front of the car lol
|
Well, the wheels used to be bronze..but with my skillz0rz i got them polished by yours truely...i just got the car to the track tonite. car still needs alot of tuning but...it was only 7psi. vids to be posted shortly
|
wow thats nice.
are the hood and headlightcovers cf?? if so where did u get cf headllight covers? that would be sweet. especially if there was one w a vent in it. what kinda exhaust do u have too? great car! cant wait to see the vids of it in action. |
Well i went to the local 1/8mi track, with the car not being tuned (w/o a wideband) the car has tons of room for improvement on 7psi, 7psi since i dont have a boost controller yet, this gives me a chance to learn the car for my big runs. well here are the vids, the FIRST one is my very first run, i believe it was like a 9.0 @80mph
RIGHT CLICK AND SAVE AS... First Run http://slammedblk7.cyberosity.com/Picture%20120.mpg Burnout(kinda) http://slammedblk7.cyberosity.com/Picture%20123.mpg Last run from burnout-->Ran an 8.65 @84mph http://slammedblk7.cyberosity.com/Picture%20124.mpg |
Seems like you need a bigger turbo and a few other little things here and there...
|
Originally Posted by Slammedblk7
Well i went to the local 1/8mi track, with the car not being tuned (w/o a wideband) the car has tons of room for improvement on 7psi, 7psi since i dont have a boost controller yet, this gives me a chance to learn the car for my big runs. well here are the vids, the FIRST one is my very first run, i believe it was like a 9.0 @80mph
RIGHT CLICK AND SAVE AS... First Run http://slammedblk7.cyberosity.com/Picture%20120.mpg Burnout(kinda) http://slammedblk7.cyberosity.com/Picture%20123.mpg Last run from burnout-->Ran an 8.65 @84mph http://slammedblk7.cyberosity.com/Picture%20124.mpg :drool: can't say it enough :drool: |
Originally Posted by snub disphenoid
Seems like you need a bigger turbo and a few other little things here and there...
Wheres your car? |
Why are you guys burning out on street tires?? The 5zigen wheels look nice...the size is perfect. What is the offset/width? I preferred them in bronze though. IC piping came out good, it will look nice after coating. You didn't get us a pic of the core in the bumper though ;)
|
All times are GMT -5. The time now is 01:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands