MSD on a rebuild
This is probably a dumbass question but can putting a msd on a fresh rebuild have any negative effects? I am just kinda paranoid over my investment.
|
It shouldn't, but if your worried just wait until its broken in to wire it up. However it will help with starting (cold and hot) but the only hp gains are up top in the rev range atleast thats the only place i noticed any difference. it may have helped the low end but it's been so long since i've driven my coupe i dont remeber.
|
No, it won't. It'll provide a minor benefit in helping start when it's a bit flooded (common on rebuilds with low compression). You'll be fine.
|
Thanks alot.
|
what the hell does the MSD thing do anyways!
|
bigger sparks
|
Originally Posted by C-Murder
bigger sparks
|
Which Msd system do you have?? I have a Msd 6a system under my bed right now with the 8k rpm rev limiter.
|
Originally Posted by stinky277
Which Msd system do you have?? I have a Msd 6a system under my bed right now with the 8k rpm rev limiter.
|
The MSD 6AL was the one with the limiter. Same unit tho other than that.
|
You guys using the stock coil with the MSD ignitor or do you use the MSD coils too?
|
who needs a rev limiter on a FC anyways?
|
Originally Posted by Karack
who needs a rev limiter on a FC anyways?
|
stock coils are fine, can use bosch though if you want.
|
wow, thats the first I've heard about there coils. What specifically is crap about them?
|
well most people want to push higher RPMs than stock with the rotary but the problem is the ECU cannot process much higher than mid 7Ks on the S4 and spark starts the break up in that range as well. upgrading to standalone and upgrading the coils or adding on MSD boxes is what most people do to cheat the stock management systems.
|
How much do they go for on ebay?
|
around $100 last time i checked.
|
Originally Posted by C-Murder
How much do they go for on ebay?
|
All times are GMT -5. The time now is 08:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands