RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Mookeeh Mk1 Coilover Conversion Kit (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/mookeeh-mk1-coilover-conversion-kit-463765/)

Bounter 09-16-05 04:53 PM

Mookeeh Mk1 Coilover Conversion Kit
 
Anyone know anything about this coilover kit?

http://cgi.ebay.com/ebaymotors/MK1-C...spagenameZWDVW

Funkspectrum 09-16-05 04:58 PM

looks like junk to me

felixwankel88 09-16-05 06:42 PM

i would say there worth a try 1/2 the price of ground controll there gonna be likne amy 100 bux junky ebay coil over, i would say there decent though

EvilWankel 09-16-05 07:59 PM

I was looking for parts today, and kept running across these "RARE" mookeeh parts. But I found them everywhere, so they arent rare. Sounds like some small company selling cheaply made parts.

ONLY BUY MADE IN USA!!

hah.

SureShot 03-09-06 07:25 AM

Well, I just installed them.

I received the coilovers in 3 days.
They are a good product, and a really nice job of value engineering.
(That means they're cheap, but still work good.)
My 16 year old stock struts are just strong enough to control any bounce.
I was expecting the nicely stiffer ride, and I am very happy with the results.

geetarstar 03-09-06 12:21 PM


Originally Posted by SureShot
Well, I just installed them.

I received the coilovers in 3 days.
They are a good product, and a really nice job of value engineering.
(That means they're cheap, but still work good.)
My 16 year old stock struts are just strong enough to control any bounce.
I was expecting the nicely stiffer ride, and I am very happy with the results.

Hey SureShot was it a direct fit or did you have to do any minor fabrications to get them to fit?
They dont look all bad, it looks like a good fit. I'd buy them but I already invested in Eibachs springs.

SureShot 03-09-06 01:15 PM

I had to grind about 1/16" off the diameter of the top disc of the strut so the aluminum sleeve could slide down over it.
Also there was a large steel washer that backs up the top hat, and I filed its hole some to get it to slide down the piston rod.
That may have been unnecessary, since it really didn't have to slide down that far.
There was an assortment of O-rings in the kit to go between the strut & the sleeve, to center the sleeve & prevent rattles.

The Eibachs are probably better springs, but if you need adjustability and have a tight budget, these do the trick.

davena7 03-09-06 01:20 PM

what about drop or spring rate.....any info

SureShot 03-09-06 01:31 PM

Specifically: I don't know, but as you can see they are short.
So the rate has to ramp up rapidly with compression.

Subjectively: If the road is fairly smooth, you don't even notice the difference, but when you lean on them, they get stiff.

That just happens to be my preference.

Drop: I'm set about 1/2" down right now, until I see how much they settle as the metal & rubber parts work together.
There is another inch of adjustment after that.

hypothermix79 03-09-06 01:34 PM

no offense but those are just the same coilovers that are universal for all models of cars on ebay and you can get them for ~60 shipped.

SureShot 03-09-06 01:51 PM


Originally Posted by hypothermix79
no offense but those are just the same coilovers that are universal for all models of cars on ebay and you can get them for ~60 shipped.

They range in price.
The 2nd gen RX-7 ones start at $130 + 30 shipping.

I plan to lean on them through Deal's Gap on Apr 8.

LAN 03-09-06 02:28 PM


Yeh, i was t"hinking" that they are universal.
I've read that FRONT:8K REAR:6K
Also there's this guy that I talked to who recently purchased a set and he said the front looks funny that's why they only show the REAR on ebay...
Anyone got a clue about this?

Just a question..Aren't those too hard for like driving around the city?
Even if you have the adj shocks/struts? And also, can the shocks/struts handle those spring rates?

Thanks.

ddub 03-09-06 02:35 PM

I just think of Honda junk when I see those http://cgi.ebay.com/ebaymotors/96-98...QQcmdZViewItem

I've been in a couple hondas with the ebay coilovers, and I'm not a fan. The ride was OK but overall was kind of shitty. I think these are mostly for looks, and not for performance value at all. Try taking some hard turns or spirited driving on curvy roads and see what they're like after that. I don't think they'll be able to respond good enough, especially with stock shocks.

My .02

-Ryan- 03-09-06 05:24 PM

I just got an fc cand it had some cheap ebay coilovers on it, probably the same you have.

IMO: THEY SUCK! first thing Im doing is ditching them.
I am getting agx shocks cuz thats the biggest issue with my suspension now, but when installing im throwing stock springs on until I decide what I want to upgrade to.
HORRIBLE feel, smooth roads arent noticeable, but hit a bump and it feels like your riding on a brick.

sc0rp7 03-09-06 08:48 PM

IMO, every stiff aftermarket springs that i have rode on (in my car or others) makes it feel like riding on bricks or so... lol... I kinda like the ride but thats opinionated, thanks for the info on the coil overs, i will probably be getting a set too...

LAN 03-09-06 11:11 PM



- Qoute
Honestly i'm a little unhappy with the kit. I wanted my 7 LOW. I lowered the rear coilovers to what was perfect. The Rear looks great. Then I went to lower the front and thats where i had problems. The collar (that you spin to lower it or raise it) ended up hitting the placement screws before it was level with the rear! So I actually took the screws out and just made sure that the threaded collar was centered on the strut. THIS IS WHY THE PICTURE SHOWS THE REAR OF THE RX7 LOWERED AND NOT THE FRONT CAUSE THE FRONT CANT GET AS LOW AS THE REAR WITH THE SCREWS IN THERE. So basically my Eibach Springs were better because it was actually lower and Eibach's quality is Phenomonal (as far as handling). I'm also an autocrosser and have yet to autocross with the coilovers because the season hasnt started yet. but from illegal driving on the streets to test its handling they didnt compare to the Eibach Springs. - / Quote


Got any photos installed?
What kind of shocks are you using them with? and How do they feel?
Say combine that with TOKICO HP......

SureShot 03-10-06 06:29 AM

My current setup is 1.3" down in front, 1" down in back, which gives me 5.5" ground clearance on 225/50-16s.

In general:
MK1 coilovers = OK
Eibachs = Better
Eibachs with Ground Control adjusters = More Better
Tokiko adjustables = Best

It comes down to how much you have to spend & how much adjustment you need.

geetarstar 03-10-06 12:43 PM

Eibachs pro kit + Tikico Illuminas is my setup and it feels great. The response is very good eventhough the springs are progressive, but the Illuminas keep me stable.

Sureshot are you running anything else in your suspension like swaybars or strut bars?

teamfuel 03-10-06 12:53 PM

My buddy just got a set for his mkIII turbo supra...and they suck...Cheap junk!

Mr. HKS 08-24-06 01:23 AM

just installed mine today, instructions are really bad. couldnt figure out how the rears were put together, eventually it went in. i'll see how it rides now

RotaryEvolution 08-24-06 03:57 AM

my fucking spine twitches when i see pics of those coilovers, please don't link to them in the future to save my back the stress of having to look at those pics again.

decent drop springs give the same effect without the rigid ride, spend a couple of extra bucks and save the hassle and strain on your backs.

ussprinceton2004 08-24-06 03:59 AM

works great. I have a set for sale

http://i79.photobucket.com/albums/j1...4/DSC00267.jpg

rx302 08-24-06 05:37 AM

The problem is these springs settle and sag when broken in. They are great at first, but then they drop more and your alignment goes to crap.

SureShot 08-24-06 08:48 AM


Originally Posted by rx302
The problem is these springs settle and sag when broken in. They are great at first, but then they drop more and your alignment goes to crap.

All new springs settle.

These springs are just stiff as hell.

I just happen to like stiff as hell.
Many others do not.
It's a matter of personal preference.

snowball 08-24-06 09:44 AM

they seemed nice enough when i rode in SureShots FC.


All times are GMT -5. The time now is 05:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands