Mods page is up!
 

I got around to moving the stuff off the old K2RD site.&nbsp So far, I've got the MODS page up now.&nbsp Most of the old timers should recognize the layout...&nbsp Any problems or questions, just drop me a note!

http://fc3s-pro.com/TECH/MODS/mods.html

(I'll get to installing the front pages later...)




-Ted

Thanks Ted!!! :bigthumb:

Open page > Ctrl-D

Bookmarked for later insight. Thanks

looks sweet. I might be pulling some info from ya for my mods / racing section :D

looks great can't get the silicon hose section? will there be a how to?

Yeah, the silicon page actually points to the problems section - I'm working on that right now...



-Ted

Ted, I love ya! just kiddin, I just like ya a lot :p:

Thank you Ted for your hard work! Looks like it'll be TEEMING with great info :)

Woohoo!

PaulC

Sweet!!! Looking forward to the complete site. Deffinitely bookmarks bound.

WOW...we owe you one man

thanks !!

Nice work as usual, Ted.

when are you gonna have some pics on how a 90 wastegate looke when ported?

Great job. I will be using this in the near future for modifications.

I've found that this is really unnecessary.&nbsp One mod you could do is "bend" the flapper door a little bit so the double flaps open fully.&nbsp In their stock condition, it only opens like 75%...


-Ted

Good info there.
Thanx
GZ

I dunno if anyone is reading this, but I put up one section of the Problems page, so the vacuum hose link is working now. :)



-Ted

So silicone hosing is okay for the the hose that goes from the brake booster to the pipe on the firewall? The manual talks about some kind valve in it. I was wondering because I remember a post about someone saying their silicone hose collapsed or something.

looks like alot of time was put into it, thanks man.

Thats great man!
yaa!! hooraa for RETed!

The 10mm stuff I used was thick enough to prevent collapsing.&nbsp I never had a problems with my brakes with the set-up I've got so far.&nbsp Also, the 10mm section I mention does not replace ALL the hose that goes in the brake booster - it only replaces up to a metal fitting in the middle the firewall.&nbsp There is a check-valve that's located closer to the brake booster itself...


-Ted

....and I was wondering where the hell did that page go....:D

...I had actually bookmarked it directly, but when it disappeared from the main Site, I never thought of trying the direct link....

ted, if i had a son, he would be just like you! ummm ok..

scott

Okay, I put in all the front pages, so you don't have to bookmark directly into the intermediate pages.

http://fc3s-pro.com/

It should work, and mostly everything is uploaded and linked right now.

Enjoy!



-Ted