Are Mazdatrix parts OEM?
I need to change out my clutch master and slave cyl and was looking around and saw that the Mazdatrix parts are more expensive then say Autozone. Are Mazdatrix parts oem? Would I benefit from them over the autozone parts? It is about a $50 diffference.
Thanks |
many of Mazdatrix's parts are indeed OEM, while some are not.
With a clutch master and slave, I would go with whoever is the cheapest as they mostly use OEM cylinders that have been re-bored anyway and a master/slave O ring is pretty much the same no matter what. |
thanks thats exactly what I was looking for. I like it when the cheapest works....not too often that happens
|
I would not go with generic rebuilt hydraulics as I tried this with my 1st RX-7 and had to buy new OEM from Mazdatrix after the rebuilt clutch and brake masters failed.
|
parts store versions of regular OEM parts like that have 1/4 to 1/2 the life in my experience, sometimes worse.
|
so you two are suggesting getting the mazdatrix parts?
looking at a price difference from NAPA to Mazdatrix of $95 to 130. The NAPA parts say "Product Features:Meets or Exceeds Original Equipment Function & Durability" |
Originally Posted by arghx
(Post 8831824)
parts store versions of regular OEM parts like that have 1/4 to 1/2 the life in my experience, sometimes worse.
You can buy a "parts store" part that's made by the same company that makes the OEM Mazda part (so it's the same thing) for cheaper. |
Ok so I just came to this conclusion...
The master is only a few dollar difference so I am going to get the mazdatrix one since I am getting the braided line there anyways. And I am going to get the NAPA slave, since it is half the price and a lot easier to change if it fails, and does state that it is OEM quality unlike the autozone one. |
Originally Posted by eage8
(Post 8831858)
not if you buy the right brand... most of the time parts stores have several brands in stock and will just sell you the cheapest because they assume that's what you want.
You can buy a "parts store" part that's made by the same company that makes the OEM Mazda part (so it's the same thing) for cheaper. |
Originally Posted by Spock
(Post 8831862)
Ok so I just came to this conclusion...
The master is only a few dollar difference so I am going to get the mazdatrix one since I am getting the braided line there anyways. And I am going to get the NAPA slave, since it is half the price and a lot easier to change if it fails, and does state that it is OEM quality unlike the autozone one. Anybody have any exp with blackdragonauto parts? |
Originally Posted by arghx
(Post 8831980)
For things like O2 sensors, yes, as they are both from Bosch. But a part remanufactured in Malaysia like a starter is just not the same as OEM, even compared to an OEM reman part (not talking about OEM reman engines, that's another can of worms). Aftermarket parts store stuff often don't fit right either, like the autozone replacement radiator I bought which I had to modify. I know OEM shit can feel like a ripoff but in most cases it is better, even though often it's still not worth buying due to the enormous price difference. So then people buy these parts, sell the car, and they fail again for the next owner.
As I was saying earlier, most of the time a parts store will have several different versions of the same part made by different brands. as long as you get a part made by a good brand, it'll be fine. and you don't have to pay dealer mark ups |
Originally Posted by eage8
(Post 8832506)
and you don't have to pay dealer mark ups
Here is my take: On many parts its not a big deal. I get the cheap auto-store parts many times. But for something as important as brakes, I wouldn't go cheap. Now if NAPA as has a good quality OE-type part then get it there, but it its some off-brand then you should just get it from Mazdatrix. |
all mazdatrix parts are oem except there performance parts such as racing beat stuff and some of there in house parts but stuff like the slave kits and things like are directly from the dealer there expensive but cheaper than going to the dealer
|
Originally Posted by smokie
(Post 8834757)
all mazdatrix parts are oem except there performance parts such as racing beat stuff and some of there in house parts but stuff like the slave kits and things like are directly from the dealer there expensive but cheaper than going to the dealer
|
Originally Posted by eage8
(Post 8834909)
Except the S5 thermostats... they're made by stant...
|
Originally Posted by smokie
(Post 8834929)
correction majority of mazdatrix parts are oem.....when i was working there they were using the dealer thermostat but the stant works better also they dont sell the thermo stat witht he gasket anymore that sucks
|
Originally Posted by eage8
(Post 8835017)
lol, I know of at least a few threads full of members that would argue that "the stant works better"
|
All times are GMT -5. The time now is 06:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands