Map sensor plug help
 

Just picked up an s4 that runs a bit rough, going through the tune up and lo and behold the map sensor isnt connected. No problem, lets find the plug.
Found it
http://media10.dropshots.com/photos/...805/060520.jpg

So can someone take a look at their plug and tell me what order the wires go, as in
1 2
3 4
(clip down here)
Thanks in advance

hold on let me get my camara

http://i150.photobucket.com/albums/s...k301/002-7.jpg

this is a s4 TII map sensor connector\

where is that connector located? is that the boost sensor or service connector?

its the one that sits at the front of the passenger wheel well for the n/a s4 that looks like this
http://www.partsgeek.com/assets/dima...32-1137643.jpg

i got no clue i got a tII different sensors

Thanks for trying

The wiring diagrams have it

Which one, as I haven't been able to find the specific layout for the colors, only what colors go to what sensors, which I already know. I need to know how to arrange the wires,
Thanks

The free online wiring diagrams show the pinning of each plug on the car. Example attached.

looking at the plug end of the wiring
notch up
B/W ( 12v ) ,top left ---- B ( earth ), top right
BR/R ( signal ) bottom left---- BR/W ( 5v ) bottom right

take note that FC vins at certain points have wiring revisions ,, so these colours ARE known to change as the years progress
if so you may be able to work them out systematically using the DMM ,
( which is why i included the wires / positions use )

edit,, beaten by one minute

Thanks guys