RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Manuel Sunroof (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/manuel-sunroof-371928/)

IaMtHeRuThLeSs1 11-27-04 01:57 AM

Manuel Sunroof
 
I've been thinking. I have 2 Rx-7s and the sunroom doesn't work on either of them. The motors just suck ass, and I dont want to replace it b/c it will suck ass too. Has anyone Converted the sunroof to a manuel sunroof? And if so, is there a kit to do it? I can see how I would do it now, wouldnt be very hard (the sunroof just looks so sexy back) If none's made a kit I think I'll do a practise conversion on my parts car, and if I get good enough maybe make a kit out of it. but hey i dont want to reinvent the wheel so if anyone has already done this let me know.
thx guys

StonedDrone 11-27-04 03:39 AM

haven't seen a kit, but i bet you could so something custom using a window type crank without having to try too hard, just that the crank would end up being behind you where the motor is mounted and you'd have to reach backwards to turn it.

13bpower 11-27-04 05:00 AM

A couple years back someone here was making a Lexon moon roof replacement. Doubt he ever made or sold many. Could probably find the threads on it with a search.

Syonyk 11-27-04 09:29 AM

There's the "manual sunroof crank" under the plug behind you (center of the car on the bulge in the ceiling). In the glovebox *should* be a sunroof crank, for the purposes of closing it if the motor dies while it's open (or such). I'd look for an old knob (like the old Caravans had before power rear vents), put the correct shaft on it, and just set that in place. It will probably take a lot of turns to open/close it, but it should work.

Any reason you haven't opened things up to try and fix the motors? It might just be a blown fuse or such.

-=Russ=-

IaMtHeRuThLeSs1 11-27-04 12:36 PM


Originally Posted by StonedDrone
haven't seen a kit, but i bet you could so something custom using a window type crank without having to try too hard, just that the crank would end up being behind you where the motor is mounted and you'd have to reach backwards to turn it.

thats pretty much what I had in mind...

::runs off to Rx-7's with tools::

Carl Byck 11-27-04 12:39 PM

I realize this is not what you want, but I have a near new mechanism complete, that I removed from my race car. 100.00 plus shipping. Carl Byck


All times are GMT -5. The time now is 04:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands