RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Main cat becoming clogged? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/main-cat-becoming-clogged-1077062/)

bostonspgs 01-11-15 10:07 PM

Main cat becoming clogged?
 
I know this question pretty much answers itself . I fear my main and only cat is starting to clog ( after at least 700 miles with air pump removed. ) As stated I'm pretty sure that is the case . My symptoms right now are cruising afrs . I can hit 18+ cruising . BTW I'm s4 motor and lim with s5 uim . I'm keeping the cat on until I can weld a bung into a flanged resonator pipe for my 5/6 ports . Anyways back to my issue . I can run 1-4 shifting at 4k with afrs at 13.1-14.9 once I'm in 5th at 55-70 cruising my afrs spike . I'm attributing this to the most likely cat blockage and resonant heat involved . Am I wrong in this assumption ? I'm thinking of punching all the ceramic and build up and blowing it right out so the cat becomes more of a resonator . Any one have input or ideas on this (besides putting on the air pump and acv ) will be greatly appreciated

fc323 01-12-15 06:08 PM

Take it for a drive and see if it becomes red hot, that will prove without a doubt that it is bad.
As for gutting it, just smack the thing with a hammer if your too busy(or lazy) to take off the exhaust

jjwalker 01-12-15 07:45 PM

Yeah, if it doesn't have adequate oxygen supply it fouls pretty fast.

Replace it with a resonator as a straight pipe will make you car sound like an angry chainsaw.

J-Rat 01-15-15 07:54 PM


Originally Posted by bostonspgs (Post 11854510)
I know this question pretty much answers itself . I fear my main and only cat is starting to clog ( after at least 700 miles with air pump removed. ) As stated I'm pretty sure that is the case . My symptoms right now are cruising afrs . I can hit 18+ cruising . BTW I'm s4 motor and lim with s5 uim . I'm keeping the cat on until I can weld a bung into a flanged resonator pipe for my 5/6 ports . Anyways back to my issue . I can run 1-4 shifting at 4k with afrs at 13.1-14.9 once I'm in 5th at 55-70 cruising my afrs spike . I'm attributing this to the most likely cat blockage and resonant heat involved . Am I wrong in this assumption ? I'm thinking of punching all the ceramic and build up and blowing it right out so the cat becomes more of a resonator . Any one have input or ideas on this (besides putting on the air pump and acv ) will be greatly appreciated

I punched one out a long time ago. Messy, but not the hardest thing ever...

misterstyx69 01-15-15 11:59 PM

baseball bat plunge..

fc323 01-17-15 02:58 AM

^my favorite technique


All times are GMT -5. The time now is 10:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands