RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Just picked up a T2 parts car!!! Anyone need any parts? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/just-picked-up-t2-parts-car-anyone-need-any-parts-102232/)

boostmotorsport 08-03-02 08:25 PM

Just picked up a T2 parts car!!! Anyone need any parts?
 
Its a 87 T2 with 90K and a perfectly good stock running motor!!! Get this 375$!!!!!!!! Roof is smashed( why its a parts car), and he is a good friend. I am keeping the motor to rebuild(1st time), polish, port, and build with a TO4, Haltech etc etc. But there are many other parts I dont need. What do you guys need?

Roy James 08-03-02 08:28 PM

You got a brake vac source check valve? i think thats all i need for now. Thanks

hypntyz7 08-03-02 08:32 PM

I can use the wiring harness and injectors, and boost sensor. Also the air flow meter. Let me know what you might want for each part, and then for it all. I really need that wiring hanress, everything else is just so I can have spares.

boostmotorsport 08-03-02 08:57 PM

I can get you the injectors, and AFM, and harness minus the last 2 inches to the water pump temp post, and alternator plug. make me some offers, I hate this process!

hypntyz7 08-03-02 09:00 PM

So the harness is damaged? What part exactly is not there? My harne3ss is ok, but Im chasing an intermittent problem that was today cured by an NA harness temporarily, so IM looking for aknown good harness, not just something to slap on there. I'd give $150 for it all, provided the harness is what I want.

niner 08-03-02 09:24 PM

i'm lookin for ecu maybe, and possibly other stuff
i'll post back by tomorrow evening for sure

Pinfield357 08-03-02 10:07 PM

im looking for a CPU not the ECU. i need the ont he drivers side near the fuse box let me know if you can part with it thanx man

Iwant7 08-03-02 10:37 PM

how much for the whole drivetrain?

boostmotorsport 08-03-02 10:46 PM

I cut off the harness the plug at the back of the altenator, and the plug off the temp sensor on the thermostat housing. Other than that the harness is oily but fine. Just splice in those 2 parts and it is mint. As i said the motor is stock so there has been no F'ing with it. I would take 150$ for the harness, injectors, and MAF. The injectors have no cracks in them, as my(other T2) original secondaries did. I own a speedshop so if you are willing to make a check or $ order out to it and send it over I will mail you the parts. Let me know what you think, I am flexible on a payment plan, but quite archaic when it comes to modern payment options(paypaletc). I could also take a credit/debit card # over the phone. Call me(Fred) at my shop(Boost) Mon.-Sat 11:30-6:00 EST and we can work out a plan. Also I know the MAF is good cuz he had a mixture issue and replaced the MAF recently and it cured the prob.



And as for the CPU I have that-make an offer.

boostmotorsport 08-03-02 10:48 PM

AS for the drivetrain, the tranny is crap with mostly bad synchroes, and the diffy is my new backup. Sorry

SwooshMand 08-03-02 11:47 PM

Do you have the power window switch from the drivers side? and how much for it and the harness.

RexRyder 08-04-02 12:42 AM

window switch fer passenger?

Roy James 08-04-02 02:06 AM

um.. what about that check valve?

AreExSeven 08-04-02 02:34 AM

Is the interior still in OK shape? What color is it?

Liquid Anarchy 08-04-02 02:56 AM

Keep the Tail-lights... you need em' :-D Just messing with you.

If you're going to get a bigger turbo, haltec, etc. Then you don't need those pesky 550cc injectors... do ya?

TurboII RudeBoy 08-04-02 03:59 AM

i want the behind the dash harness

chris1234p 08-04-02 08:20 AM

Ill give you $5.00 for the radiator air bleeder cap. Please email me at chris1234p@hotmail.com if this is possible.

ColumbusTurboTwo 08-04-02 08:30 AM

bleh its worth a try.

is the sunroof intact? even tho the roof is smashed? :(

SwooshMand 08-07-02 11:05 PM

i need the drivers side switch if you have it.

Kaneto 08-07-02 11:17 PM

Hmm, how about all hubs and brakes at all four corners? I want to swap my 4-lugs out for 5.

mazdamanda 08-07-02 11:33 PM

I need a BOV kit and starter if you have it. Let me know.
Thanks,
Amanda

hypntyz7 08-08-02 12:47 AM

On second thought might oughtta be careful what we buy...we might get a box with "HONDA MOTOR COMPANY" parts inside...


All times are GMT -5. The time now is 12:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands