JDM Engine Zone.......
 

Well my question is has anyone bought a engine swap from them before? I called them numerous of times and i was told that they run compression checks on all there motors and keep them well lubricated weekly. i have also talked to Brian from Japan2la but he's kinda pricey but have never heard any complaints from him or about his motors. Its just i'm not feeling the $350 for shipping on top of the $1873.00 for the swap. I know i'm being cheap ass but i want to know about the new guys.


Oh and i didn't know where to post this so sorry?

Greg

I haven't bought anything from that vendor, but I am confused by your post. Are you putting a piston engine in your car? Even a 13BT swap is going to cost more than $1873.00.

Might as well spend the little bit of extra money with Brian to save yourself A LOT of headaches.

Yeah thats what im thinking to but i had him qoute me the price on everything for the engine swap(driveshaft, diff, and haft shafts included) and it came up to about $3000. that was shipping included.
I'm keeping it rotary with the S5 13BT. Well the price is what he told me. i'm just trying to look for deals cause i wanna get the car driveable before this year ends. i'm well aware its gonna cost more. (all the little parts i need and if it needs a rebuild. also the drivetrain is gonna be another pretty penny).Just looking for more repeutable engine importers.

No experience with them, just stay away from osakajdm or tigerjapaneese..

Probably your best bet is to either go with Japan2LA or find a nice USDM engine that was recently rebuilt. Before i bought my TII I was going to turbo swap my vert(still am but building an engine from scratch) i planned on going with ACT clutch and flywheel and a few other things that would save me headache in the long run. I figured it out to be around $2500 and i already have the TII stuff in the car from the stock flywheel back. If you do it right then you wont have to take the time and money to fix stuff later. Also dont give your self a budget of $3000 and spend all if it on the parts. Your going to need misc. gaskets and things like that to install the engine so give your self and extra $200 or so.

You mean $1873.00 is just for a crappy engine and transmission, with the rest of the parts coming up to about $3,000? Maybe it is just me, but I would plan on rebuilding anything that has been sitting on a Japanese dock for 10 years. If you figure $2,500 for the engine rebuild, and $800 for the transmission rebuild, I don't understand why you don't just sell your NA car and buy a TII. :scratch:

Why not search the classified ads for a TII or a NA-TII conversion that some other sucker sunk his money into and now must take a huge loss? Or how about just buying somebody else's unfinished project for a steal?

For example, here is a highly-modded 91 TII with NEW engine for only $3800:
https://www.rx7club.com/2nd-generation-rx-7-1986-1992-vehicles-108/1991-mazda-rx7-turbo-ii-fresh-rebuild-restoration-making-853664/

I saw alex's post about his car for sale and believe me, if i could get it i would but that car is located all the way in california! (i live in miami,florida). I'm keeping my eye for a car like that so.

Well its not too hard to pick up a TII. As long as you are ok with minor things like paint and such you can score big. I picked up my 10thAE two weeks ago for $1800 and all it needs is new seat covers and paint. It only has 85k miles on it too.

well there really isn't any luck on here. one of my buddies is selling a S4 with everything still in it for a grand and it has a rebuild that is questionable? (really questionable). what it needs is a radiator and some TLC. But when i saw the car, the engine was still in pieces but they claimed it drove fine. You just couldn't punch it from a dead stop or it would bog. Oh and to add to that they also that when it was in boost it ran fine (if you understand what i'm saying) i don't mind taking the long route but i would really love to keep my S5 (sentimental value)

Fortunately for you, there is this new invention called the "airplane".

American Airlines Flt 499/465 MIA-DFW-SAN Departing 0900 29AUG09: $79+$21.20= $100.20

well i didn't know that shipping by plane wouldn't be that much? thanks for the info. and i'm overlooking the smart remark

Classic....

Keep this thread going...

I like it...

^^^^dude really. this is why i must ask. i'm not knocking on your business, hell it looks like im gonna be going to you anyways. just trying to find a closer place that is all. just asking for other people's input on what way they went if they're doing what im doing (yes i did search)

fly out drive back

You and I both make a lot of money off of the financially-challenged, so I guess I can't complain.

Since he joined the thread, what are his prices? He is usually pretty much the same as the rest of the market unless he has something that he thinks is rare. I would imagine that he doesn't think a 13BT is rare. Also, he may be able to find a good deal on some other things that you may need, such as a LHD TII throttle cable, LHD TII wiring harness, boost sensor, S5 TII gauge cluster, etc.

No worries Greg..

I am just bustin your balls a bit..


Not in so many words, Evil was saying.. If you found a Decent TII F.S. you could buy a Ticket, Fly in and drive the car home...

Nothing like driving a car you are not 100% confident with 3000 miles.....

Disclaimer: ^ purely my biased opinion..:dunno:


Anyway, do what is best for YOU...

If you buy from me Great!
If not, that is cool too...

its all good dude. hell i know your promise only good quality stuff. i would love to drive a car across the country (as i do have family over there). I would have to arrange to stay with them a bit, then drive to were the car is at and get lost on my way home lol. oh and sorry i missed your call. but thanks for the input all.

look i live in miami too . i got my engine and tranny for $ 1000 from JDM of miami.com and the parts such as drive shaft, diff, ecu, and half shafts i got it from a place right off hallandal beach bluv in borward for just $1500 i am in the middle changing my 89 n/a to a s5 T2. they are some JDM importers in town but you will need to find a T2 wire harness

or a wrecked TII...

I'm still looking for one of those. I found one earlier this year S4 though and the guy couldn't hold it for to long.

[QUOTE=Evil Aviator;9383316]You and I both make a lot of money off of the financially-challenged, so I guess I can't complain.
Well its not the first time you heard of a budget build. Plus i got my currenty 7 for free (very clean if i might add) this is why i'm asking if you guys if you bought from this place or even heard of them

it doesn't matter where you buy the engine from...what matter is the policy to which if the engine is screwed, what is it the company's going to do...


If you plan on dropping the engine from the loading dock to your car go with Brian.

If you are going to rebuild it..."unless the engine is BLOWN or the internals are screwed" just buy it from any importer that doesn't have a history of screwing people and rebuild it.

Don't make it to complicated...you can spend months trying to find the right motor....but truth is some of these motors are setting in china or Japanese junk yards being rained on or snowed on and brought to the US and are pressure washed to look pretty...

look http://cgi.ebay.com/ebaymotors/JDM-M...lenotsupported

a 13bt engine with free shipping and transmission


Not bad...if your engine savy open the engine up and replace what only needs to be replaced and install new soft seals and buy some apex seals from rotary aviation or if the stocks are in specs plug them back in.

No matter where you buy these JDM motors you probably buying an engine what hasn't seen engine operating temps for years or slowly eroding internals.

.

since im gonna rebuild reegardless, im gonna look things over then at what to get. again thanks for input guys

I have Core Longblocks in inventory..

These are engines that came in from japan but did not meet my compression/condition standards...So I did not sell them. I usually break them down and sell them in parts..

If you want to buy a core engine ( Needs a rebuild/ Sold As-Is), I can deal on one of those..

I usually sell them for a little bit over 1/2 cost of a good guaranteed compression engine..

I posted some links below from craigslist of parts for sale... I would not put a used engine in my 7... You don't know internally what condition the engine is or how long is going last you... I would rebuild the engine REGARDLESS from whom you get it from... Anyway good luck with your seach, and remember one thing, you get what you pay for...

http://miami.craigslist.org/pbc/pts/1288060269.html
http://miami.craigslist.org/pbc/pts/1280316112.html
http://miami.craigslist.org/mdc/pts/1248077407.html
http://miami.craigslist.org/mdc/pts/1291139770.html

true you do get what you pay for but like you said i'm gonna rebuild it.
oh and Japan2la pm me with what you have

Oh yeah a dead engine that he sold me that I had to rebuild...
Good luck with your search, and you are better off getting an engine locally, so you could take a look before you buy, cause once you buy you stuck with it...

Not that I need to comment.. but, what the hell...

Still a MORON... I see..

Here to embarass yourself again??

Search the thread he started and the scam he attempted to pull off with me..

Every single person who posted saw thru his B.S.

Hey MORON are you still a FEDERAL EMPLOYEE?? Still laughing about that one too..

Greg if you want a core, or want to talk about one, call me tomorrow...

okay cool man

I see that you are still the same SOB... I was not even going to start with you but i see that you went ahead and already starting running your mouth like the little bish you are... You still have poor business ethics, and from i have heard from other people i have not been the only person that you have jacked up... Many other people consider you as a person that conducts SHADY BUSINESS... I personally don't care if he buys from you or not, but he should look into his options... I wish you were the man/woman you think you are...

Good luck to you with your project Greg and do your research before you make a desicion.

Go back to thread you started and re-read it it.. all your claims where bullshit..you and I know it and everyone else who chimed in agreed.

Even after all the claims where debunked, I was still willing to give you a refund , just to shut you up...all you had to do was send the engine back...and you refused to do that..


Now you are here with your B.S. again...the shit is more than getting old.. You are full of claims with zero evidence or proff to back any of it up.. and I know you hate being called a MORON but that is the name you gave yourself..and from everything I have seen it fits you perfectly..Why dont you contact a MOD and ask to have it changed?

Who else here sees Japan2LA doing shady business? To my knowledge, about 90% of the people on this forum have done business with him and were satisfied with his service.

He's one of the only U.S. rotary importers to actually TEST the motors that he sells.

And sometimes when people order motors from him, they get a little extra. Theirs several members here on the forum that have ordered motors from him and it has already come with a double pulley or a aftermarket clutch. Japan2LA is a great importer.

When I got a quote from him for a S5 13BT, I thought the price was very reasonable compared to other importer companies. I was quoted $1295.00 plus shipping for a guarenteed running motor. If you search around, thats pretty much the best deal your going to find. Sure, ebay or craigslist is going to have one for cheaper, but chances are its already blown or is going to very soon.

A local importer shop that I hang out at (who will not be named) ships out motors with cracked apex seals every now and then. Theirs not much they or you can do about it, its how it arrived, and as usual with rotaries, their almost always as-is. Their are very few importers that will warranty rotary engines.