RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Internal Gaskets (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/internal-gaskets-336598/)

powrdby13B 08-09-04 11:47 AM

Internal Gaskets
 
STORY: There used to be a nice little auto parts store near my house, owned by a friend of my father. I used to go ask him for gaskets for my Mazda RX7's and he used to get me all that I needed, based on what I am doing. His shop closed, and now I seem to have to find my own stuff. Most of the parts are relatively simple to find on the internet or whatever, except for the internal gaskets [the ones that connect the cast irons to the rotor housings]. Mazda sure as hell is expensive... Where do you guys get that stuff for yourself? Every place I can find says they don't have the "internal O-rings", "external gaskets only", etc...

Where do you get YOUR internal gaskets? Everyone sells "external gaskets only" or "no internal o-rings"... and mazda is expensive as hell...

RETed 08-09-04 12:02 PM

http://www.mazdaformance.com/


-Ted

powrdby13B 08-09-04 12:11 PM

nope...
but this http://www.atkinsrotary.com/store/th...ls/t_16259.jpg
which is here --> http://www.atkinsrotary.com/store/cu...cat=480&page=1
looks like it has it, no?
Or rather it has all i need to reassemble the 3 cast irons and the rotor housings right?

powrdby13B 08-09-04 12:36 PM

spose its time for a bump...

Aaron Cake 08-09-04 12:47 PM


Originally Posted by powrdby13B
spose its time for a bump...

It's never time for a bump.

I just buy them from Mazda.

WonkoTheSane 08-09-04 12:50 PM

that was pretty hard to read, but i'm taking a shot at it: "It has all I need to assemble the 3 irons and rotor housings, right?"

that is essentailly a "soft seal" kit, so it's going to come with the o-rings that go betweent the irons and housings (The water and combustion o-rings), amongst others. It looks like it may include the tensioning bolt orings, too, but Ic an't tell for sure. Assuming that all of your hard seals & springs (Apex, side, corner, etc, etc, etc) are good, then that kit should be all you need. Give em a call, if you have questions about the contents, though, they're nice people ;)

Just for the record, i got mine from rotaryaviation....

I'm sure someone else has used this specific kit, and can tell you more about the contents, though.. HOpe this helps.

RETed 08-09-04 01:49 PM


Originally Posted by powrdby13B
spose its time for a bump...

Do you have a problem comprehending?
You need to get them from the Mazda dealer.
Mazdaformance is a Mazda dealer.


-Ted


All times are GMT -5. The time now is 10:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands