which intercooler size
i gotta s4 and was wondering what size intercooler set up should i get.
im looking at 3 ebay ic's HEIGHT X LENGTH X THICK 6.5x18.5x3.5 for 169 9x20.5x2.5 for 168.95 12x24x3 for 178.95 there all about the same price which one would be a better deal and efficiant? thanx |
Stock turbo and boost? If so you don't need anything bigger than that 6.5 one. Or you can do the ricer thing and just get the biggest one you can fit in the car...
|
t04 with streetport only 5lbs now waiting for fmic
|
47x27x10, inches of course. :)
9x20x3 would work well I'd think |
Originally Posted by 1300ccTuner
t04 with streetport only 5lbs now waiting for fmic
Can you give us the COMPRESSOR WHEEL SIZE? -Ted |
Originally Posted by RETed
"t04" doesn't mean jack shit to us.
Can you give us the COMPRESSOR WHEEL SIZE? -Ted |
Originally Posted by 1300ccTuner
t04b p trim .96
"t04b" means it's just a 2.75" inlet on the compressor housing. It could be anything from an S-trim to an H-trim? S-trim is about the same size as a stock Hitachi HT-18. H-trim has capabilites to produce 400hp at the wheels. The H-trim roughly flows TWICE as much as the S-trim does. The "p trim .96" just described the turbine wheel and turbine A/R. This has nothing to do with the compressor wheel size. -Ted |
Originally Posted by RETed
That still doesn't describe the compressor wheel size.
"t04b" means it's just a 2.75" inlet on the compressor housing. It could be anything from an S-trim to an H-trim? S-trim is about the same size as a stock Hitachi HT-18. H-trim has capabilites to produce 400hp at the wheels. The H-trim roughly flows TWICE as much as the S-trim does. The "p trim .96" just described the turbine wheel and turbine A/R. This has nothing to do with the compressor wheel size. -Ted thats what all it says hope it helps |
"super H" - now we're getting somewhere.
The H-trim is capable of producing 400hp. What psi were you thinking of running? If it's 15psi or more, I would go with the biggest on the list. The turbo can use that kinda cooling for getting close to 400hp. Good luck! -Ted |
OK.... Screw all that Turbo nonsense..... I got some better info.... :)
My IC is 26X8X3.. with a 20X8X3 core.. it sits between the frame rails on my S4 so that the front of it is even with the end of the rails.... its a finned, Modine core, at 15 PSI I never see more that 115 F intake temps.... http://mysite.verizon.net/res1f3en/s...s/ic2_0424.jpg Please ignor the lip runner.... its been fixed now!!!!! Here's the kicker..... because it sits in the frame rails..... and takes up the entire area in the tunnel...... the ENDTANKS are in the frame rails.... the ENDTANKS don't flow air through them....... at 3X8 east that 48 square inches of air passage thats blocked by the end tanks......... the rest is core while it flows, its still restrictive End result is that, until i make up some other ductwork, get a vent hood and/ or a different front bumper.... its impossible for me to use an E-Fan.. not enough air flow through the core to the radiator..... with an E-Fan... at 65 MPH... the temps are still gradually climbing until the fan kicks on..... The IC is perfect for my car in its cooling capacity and I only spent 500 buc ks on my complete FMIC setup..... HOWEVER.... the BIG ASSED Greedy FMIC"s have the added advantage of passing more air THROUGH them to the radiator... Moral.... get the biggest friggin IC possible!!!!! |
ill be doing this very soon............
H-trim airesearch stage 2 guess ill be buying a koyo rad. too |
All times are GMT -5. The time now is 12:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands