injector clips and where to buy them?
the wankler just changed his out for new ones and it cured his bucking under boost prob. si im wondering where to buy this pigtails and clips from he says local shop and thats why i ask? and on a samll note i put in a request for motoria to see if they can fab up a bigger intake manifold for the fc thats like the fd and cosmo style but better so we will see>>>>
|
i dont beleve the dealer sells anything other then a complete engine harness harness. you could try RC engeneering i know that there injector clips fit on stock injectors
|
go to the junkyard. certain newer Audis / Vw's use the same injector connectors. Im sure other cars do as well.
|
I went to a place called Monument Car Parts. I bought the typical Bosh injector clips. I had to insullate them because they do not come woth a cover like the stock ones to keep water from entering through the rear of the clip. No big, I bought some real nice silicone tape, and shrink wrapped the ends. You also need to shave the little offset tit onthe injectors for the clip to fit. No big deal there either. The groments are just Denso groments. Ask for them.
Good luck bro. |
Hey Wankler, glad you found the problem out! Thanks for the input in this post.
|
Originally Posted by LaRazaUnida
Hey Wankler, glad you found the problem out! Thanks for the input in this post.
|
Seriously, how many times do I have to answer this question? You know if you search for "injector clips" you will find many topics covering this, most of them in the last 6 months or so. :)
Most auto parts stores will sell them. They are standard Bosch/Denso injector clips. They come with wire leads, or crimp style. If you do not have the appropriate crimper get the ones with leads and then solder and heatshrink the connections. If you are looking for an online source, there are many: http://www.rs-autosport.com/ http://www.diyautotune.com/catalog/w...4ef0f6f26c971a |
lolololololol..... I searched and read your post! Thanks Aaron!
|
Kgparts.com
|
Originally Posted by Aaron Cake
(Post 5804921)
Seriously, how many times do I have to answer this question? You know if you search for "injector clips" you will find many topics covering this, most of them in the last 6 months or so. :)
Most auto parts stores will sell them. They are standard Bosch/Denso injector clips. They come with wire leads, or crimp style. If you do not have the appropriate crimper get the ones with leads and then solder and heatshrink the connections. If you are looking for an online source, there are many: RS Autosport MegaSquirt Wiring Harnesses, Wiring Connectors, CLT and IAT Sensors Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products - DIYAutoTune.com Brgds Steven |
All times are GMT -5. The time now is 07:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands