RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   I think my is dead!!! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/i-think-my-dead-228403/)

red t2 2003 09-30-03 04:56 PM

I think my is dead!!!
 
Well I have a 87t2 with 91 t2 motor the motor stock with a chris sanders tid. The motor has 35000 milles and the car ran fine yesterday. I installed 3 inch down pipe and n1 exaust. I started the car and it sounded kinda funny?!? So i drove down the street and the shit was mad slow!!!!! Like the shit was blown!!!! I have no fcd. I have 550 primary and 550 secondary Oh yeah and a 3rd gen fuelpump . Anywayz I stop the car and pulled out the spark plug wire for t1 and the car didnt do anything . I pulled t2 , L1 ,and L2 and the shit wanted to die . PLEASE DONT TELL ME SHE DEAD help anyone!!!!!!!!!!!

87RXGhey7 10-01-03 12:14 AM

you should have ported the waste gate, sounds like you blew the turbo w/ the free flow exhaust, happens all the time to people that dont know.

twistedriver 10-01-03 12:21 AM

Should he stop driving the car right now? Would a piece of turbo get in this engine?? WHy did the freeflow exhast blow his turbo??

87RXGhey7 10-01-03 12:27 AM


Originally posted by twistedriver
Should he stop driving the car right now? Would a piece of turbo get in this engine?? WHy did the freeflow exhast blow his turbo??
what are you talking about? free flow would make the turbo spin too fast and run more psi than the wastegate could handle, wait, its too late at night, someone tell me how it works. But anywho, the car should be ok to drive, and no pieces of turbo should get in the engine. Also I would check the connections on the plugs, sometimes they're just bad, and wont spark.

ViperKillerWannabe 10-01-03 01:02 AM

Do a compression test. This is like the ultimate test for a bad engine.

J-Rat 10-01-03 02:03 AM

what?!?

red t2 2003 10-01-03 09:15 AM

If you mean take out the flap door inside the manifold . I did ! The turbo was making a real funny noise . Like something was in there . I m going to check the turbo today !

Rotary?Cool 10-01-03 09:27 AM

If you took the flapper door of than the wastegate is constantly open. How will it build boost?


All times are GMT -5. The time now is 05:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands