I need a new turbo set up help please.
hey guys well im in a dilemma right now car is almost ready to hit the street after three years of building.. the turbo i went with was a stage three bnr and when i was getting it tuned i only received 220hp to the wheel and 220 foot torque \. wtf is that ? i was looking for 300 350 to the wheel. i built and did everything right im boosting like 12psi... using T03 with all new bearings. were can i go to get a better kit thats going to give me what i want. thanks guy s :scratch:
|
Originally Posted by t2 boost brotha
(Post 10891052)
hey guys well im in a dilemma right now car is almost ready to hit the street after three years of building.. the turbo i went with was a stage three bnr and when i was getting it tuned i only received 220hp to the wheel and 220 foot torque \. wtf is that ? i was looking for 300 350 to the wheel. i built and did everything right im boosting like 12psi... using T03 with all new bearings. were can i go to get a better kit thats going to give me what i want. thanks guy s :scratch:
|
go around and get everything on the car working properly.
make sure your secondary throttle plates open correctly. do a boost leak test. what engine management do you have? what size injectors? porting job? if all that is fine I would get a new tuner because he must suck balls I made 361whp with a hybrid turbo,stock ports, 2.5" dp, tuning with a AFC neo .....220whp is pretty weak for that set up with a med streetport 3" dp and megasquirt I ran 11.42@122 with bald drag radials |
Originally Posted by FC3Sdrift
(Post 10891072)
go around and get everything on the car working properly.
make sure your secondary throttle plates open correctly. do a boost leak test. what engine management do you have? what size injectors? porting job? if all that is fine I would get a new tuner because he must suck balls I made 361whp with a hybrid turbo,stock ports, 2.5" dp, tuning with a AFC neo .....220whp is pretty weak for that set up with a med streetport 3" dp and megasquirt I ran 11.42@122 with bald drag radials |
this is bs.. rx-7 brothers. maybe it was the tuner ???? I'm feeling real played out of my money and this build
|
You're running out of injector for that turbo, but it still should've been able to do better than 220. This calculator will help you size them. http://rx7.com/cgi-local/2ndgencalc.cgi After that, it's all in the tune.
I'm no expert, but if you ran a bnr stage 3 at 12psi with those injectors, I'd think you would be looking for an engine builder right about now. |
All times are GMT -5. The time now is 12:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands