I NEED HELP WITH MY N/A ==> T2 SWAP!!
 

I have been working on a turbo 2 swap for about a month and I cannot get it right. I bought a turbo 2 parts car and swaped engine, ecu and wiring harness, tranny, rear-end, interior, and dash harness. Now I cant get anything to work. I have headlights, taillights, and 4-ways, but it wint turn ths starter and i have no idiot lights. i have to have the car out of this garage in the next couple days.. I NEED YOUR HELP!!

--james

check your grounds, fuses, etc.?

wire brush your battery connections.

PM Vipers, he did a N/A TII swap. he might be abel to help you out.

Sounds good to me.


Any other suggestions?

PM me if you have done a N/A ==>t2 swap. *please*

did you change the starter?

for now you can just hook the starter up to a swith instead of relying on the key.

this will at least get the car running and you can worry about getting the key to work later.

Did you screw with the drivers side harness at all?

On my swap I just did the EFI (passenger) side. I just ran a alternator wire for the EFI side of the TII harness instead of running it off of the drivers main harness.