RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   How much offset (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/how-much-offset-696719/)

t2josh 10-15-07 11:45 AM

How much offset
 
If i wanted to run 235's up front and 245's in the back on aftermarket rims, what kinda offset do i need to look for to make it happen.

t24todd 10-15-07 12:28 PM

id say 35 up front and a 20 in the rear to stay flush with the body..

ihumplegs62 10-15-07 12:33 PM

depends on how wide your rims are

nvrdone 10-15-07 12:34 PM

8in on the front you can run 27-30 to be flush. prolly a 9in rear and 25-30.

Roen 10-15-07 02:37 PM

F: 225, 8, +30 is recommended
R: 9, +30 is recommended, 245 or 255 would work, 255 is probably recommended

glh-fc 10-16-07 02:26 AM

i'm running 255's front and back on 9.5 inch wide rims w/ a 32 offset.the fronts stick out just a tiny bit.the rears sit just flush to the fender even w/ camber.

hurleysurf24 10-16-07 03:14 AM

theres like a 50 somewhat offset in the wheels and tires forum

btw 235 on a 17 up front will require about a 30 offset on an 8" wide wheel


All times are GMT -5. The time now is 01:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands