how to install the bee*r rev limiter in a s4 na?
 

hi guys!

Has anyone ever installed a bee*r rev limiter into a rx7 fc3s s4 na?
if yes, how did you hooked it up?

short story:
my drift car has a massive engine damage (i drive a bmw e36 with a 4.0liter v8 engine... yes, the same thing alpina called the B8, but completely selfmade swap)...

so i want to use my fc3s s4 na for the last two runs in our local drift competition this year... because of the limits given from the car and because i cannot competete in the class i normaly drive, i just want to make a funny show the last 2 events (whats better than a fu**in loud rotary shootin flames? :p ) -> so please no "you are a ricer" comments ;) trust me... i'm not :)

any help would be nice!

thanks guys

if you want to shoot flames, adjust the TPS incorrectly.

you can't hook up an aftermarket rev limiter easily due to the configuration of the rotary ignition system (waste spark leading with separate coils for trailing).

there are rx7 out there with a working bee*r installed... so it's possible ;)

I don't think you can. :(


-Ted

there are alot of youtube vids of them installed so i kno its possible

go to bee*r website i think theres a write up there

http://www.bee-r.com/main/rev/fail/fc3s.jpg

Got that from Bee*R site, seems like its 4 wires to hook up? color coded too. Though they say its only for a S5, Im sure if you know the pinouts on the ecu of a S4 you can do it also.
All 4 wires seems to come from the CAS.

good find! i need to do this to my fc'z

I was going to get one also, I drift sometimes, and i dont really want my revs to go to high then it needs too lol, my stock rev limiter doesnt work, and I dont like fuel cut limiters.