RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   HELP FOR T2 SWAP into NA (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/help-t2-swap-into-na-585464/)

chiorx7 10-08-06 09:13 PM

HELP FOR T2 SWAP into NA
 
Guys I Have The Engine And Tranny But Does The T2 Drive Shaft Fits On The Na Rear End??? Thats My Only Question 88 Na Body And 88 T2 Engine

HAILERS 10-08-06 09:20 PM

No it does not fit. Go to a local drive shaft shop to have one made or buy one from Mazdatrix.

InsomniacFC 10-08-06 09:24 PM

I don't think so. Mazdatrix sellsa driveshaft that will make it fit, but it'd probably be cheaper to find a T2 rear end.

Here's a link anywho...

http://www.mazdatrix.com/g9.htm

speed_monkey 10-08-06 09:40 PM

It will not fit.

If you get a TII rear end, dont forget that you need the halfshafts as well. It probably wont be cheap.

I just went ahead and got the mazdatrix driveshaft for my swap.

Terrh 10-08-06 09:44 PM

I think you can make a TII driveshaft fit an N/A rearend, the holes are slightly closer together on the n/a so you either need to drill out the holes on the diff, or put them in on the driveshaft, or both.

Mazdatrix driveshaft will be the easiest probably.. or just swap to a TII rearend.

Daniel577h 10-08-06 10:02 PM

you would need an auto n/a drive shaft

12akid 10-08-06 11:35 PM

auto d/s works but a lil short so they break, so get a tii rearend and d/s, [and a b16 fullybuilt with s2000 trane on it]lol inside joke 2 chiorx7

chiorx7 10-09-06 09:13 AM

LOL ur a dick 12 akid

speed_monkey 10-09-06 09:25 AM

DO NOT use an auto driveshaft!!!

Aaron Cake 10-09-06 09:32 AM

This thread is being closed because this topic is either covered in the FAQ or has been covered many times before. It is suggested that you make use of the search feature and read the FAQ to find your answer. If you still cannot find what you are looking for, then feel free to post your question indicating that you have already looked for an answer, and someone will probably be happy to help.

Please be aware that this forum has been around for quite a while, and almost every common question has been covered many times in the past. All this information is available by using the search function. Common questions are also already answered in the FAQ.

Some of the questions covered in the FAQ include:

-NA to Turbo conversions
-Electrical problems
-Stereo wiring
-Wheel sizes
-Stock HP and torque specs for all models
-Common abbreviations
-Common electrical problems
-much, much more

The 2nd Gen Forum also keeps an Archive of popular and informative posts. You can access this archive by using the links at the top of this forum.

Helpful links:
-FAQ: https://www.rx7club.com/forum/showthread.php?t=494667
-Search: https://www.rx7club.com/forum/search.php
-Archives: https://www.rx7club.com/forum/forumdisplay.php?f=72

Thank you,
The Moderators


All times are GMT -5. The time now is 04:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands