RX7Club.com - Mazda RX7 Forum - Got Cold Air?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - Got Cold Air? - I do! (Pics) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/got-cold-air-i-do-pics-181680/)

thats where my cars nossle water is.

Quote:

Originally posted by 1SxyRXy
thats where my cars nossle water is.

Dude, you gotta read the writeup!

Quote:

Originally posted by Nick86
Now, for the washer situation. I didn't want a ghetto install of the washer bottle, so I did some creative wiring. Because the car is a GXL, it came with headlight washers - and the reservoir was on the drivers side. Now, since I've used them a grand total of 3 times in 5 years, I decided that I could do without them. I rewired the pump (you can see the old connector in the second pic - the green wires are the new ones) so that the reservoir that used to be for the headlight washers now does the windshield. The only visual difference is that the washer tubes now go up the drivers side of the car instead of the passenger's side.

So in all, I have a new cold air intake, and all I had to give up was my seldom used headlight washers - I think I made the right choice. I hope you guys like it!

Sorry to ressurect, but where does the bottom outlet of teh PCV piping end up in? I need a picture. thanx in advance

I am also interested in this, could you email me the pics, since they seem to be no longer hosted, thanks. cprx7@netscape.net

LOL, since he ^ did it first, i want a pic too! The areas that I'm interested in are the pass-thru that he cut and the space available behind the fender - i don't recall there being enough space for anything back there...

Quote:

Originally Posted by Peruvianrx7

Sorry to ressurect, but where does the bottom outlet of teh PCV piping end up in? I need a picture. thanx in advance

The car is in storage for the winter right now, so I can't take pics - but when I get home this evening I'll see what old pics I have lying around. In essence the PVC pipe comes out beside the brake duct, about 6-8 inches back of the air damn. I didn't want it hanging down where it could hit things like curbs or wildlife. If I can't get a good pic, I'll make a nice diagram!

Quote:

Originally Posted by cprx7

I am also interested in this, could you email me the pics, since they seem to be no longer hosted, thanks. cprx7@netscape.net

I posted the entire writeup again half way down page 5. All the pics that I had for this thread should be there in working order. I will look tonight to see if I can find any additional pics that will help out. I'll post what I have, and if you want I can email them to you as well.

Quote:

Originally Posted by dbgeek

Keep yer pants on - I'll look for some pics!;)
Once I removed the washer bottle and rewired it properly (As described in the writeup) There was a surprising amount of room back there. Plenty to run the tube where I wanted, and line it up properly.

my mistake, page 5 has all the pictures and write-up. Thanks.

Excellent! Thanks - I'm not sure I made it to Page 5 before I got all excited and asked for more ;)

HEy bro how the hell did you hide all the freaking wires is impossible... which ones are the ones i really need? I think im just gonna have to extend all of them. Do you know which ones i really need to connect? I own a gxl but with out the headlight washer thing. thanx those wires suck!

nice work man, job well done. my hats off to ya dude , it looks awesome.

so how many bhp do you think that gave you compared with just a cone filter on the end of the maf

I did a simlar intake set up, here are some pics from mine...

http://wreckedyouth.com/modules.php?...bum.php&page=2

I'm very intrigued by this thread and am dying to see the pictures. Could you please email them to me? matthewlmoriarity@gmail.com
Thanks.