RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Gears Grinding? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/gears-grinding-743793/)

MDittz2ndGEN 03-30-08 10:32 PM

Gears Grinding?
 
Hellish screeching noise comes from the rear of the car sometimes if I over-rev at all when pushing into gear. Is this my transmission grinding? Something squeezing against a trapped animal? What's this noise, and how long until it cuts into my budget? It's an 89 GTU, so I'm thinking that it could be the weak drivetrain?

MazdaMike02 03-30-08 10:48 PM

The NA drivetrain is sufficient for NA power. It could be a couple things, your clutch could not be properly disengaging causing you to grind. That would be a bad throwout bearing. Or it could be as simple as it just being your fault, like you missed the gear when shifting.

7fold 03-30-08 11:08 PM

is there a semi-high piched whining noise at idle when in neutral? if so, does that sound go away when you push in the clutch? if so, throwout bearing is the culprit.

shadoe 03-31-08 01:10 AM

i'd say clutch

MDittz2ndGEN 04-01-08 12:32 AM

There's no whining noise when in neutral that I've noticed, I'll listen more closely though next time I drive. And I'm not missing gears :squint:


I'm planning on taking the car to a mazda specialist sometime soon to get my smog problem checked out, I'll ask them to take a look at that while they're at it. Anyone have any experience with rotorsport (http://www.rotorsport2.com/)?

Neo_Drift 04-01-08 12:49 AM


Originally Posted by 7fold (Post 8037794)
is there a semi-high piched whining noise at idle when in neutral? if so, does that sound go away when you push in the clutch? if so, throwout bearing is the culprit.

so that's what's wrong with my tranny... i was wondering what that whining noise was...
hehe. and i didn't even touch the search button. i was just thinking that it was my clutch going out. (because it is.)

i hope that mdittz can get his stuff fixed though. i don't know too much about the rx7 still so i can't help you sorry. but good luck.

MDittz2ndGEN 04-01-08 12:53 AM

Haha glad you found your answer neo, at least one of us will have hope. :uhh:


All times are GMT -5. The time now is 12:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands