front wheel f**ked
 

its a 10th ae when i got it ,the front wheel was cambered in so much that the tire was acually rubbing on the bottom of the spring pirtch....ball joint was shot so i put a new one on but the camber is the same still....cant find a way to adjust it at all thinking that their the wrong shocks on it but the pass side is fine.. maybe somethings bent what you think

are the two bolts to the strut the proper size? it could have a cam bolt that loosened and allowd the wheel to fold under.

You can try to align it , but bring the car to a shop.

ok ill check to see if it has camber bolts in it thanks im just tryn for a quik fix right now cause im completly redoin everything just the parts wont be here for like 2weeks so it looks like im just gonna have to wait

Have a close look at the strut. The lower mounts may be bent like this:

http://www.sportcompactcarweb.com/pr.../photo_08.html

That'll cause the excess camber and the rubbing problem. If that is the case then the only real solution is to replace it.

try removing and rotating the top hat, remove the four bolts on top and rotate around, it might fix your camber problem

thanks alot for the input ill check in the morning,,,,,,,,,,what you guys think about my setup......fd wheel spacer kit and wheels 265/50/ front and rear,RB springs and sway bars,kyb adj. on the back, and tokico 5way on front, master poly bushing kit, tein pillowball top mounts fron and rear,. everything should be here within a week or so ill take pics and post of before layout and before and after of car