Fried afm need a pic
Friend Fried my airflow meter. I opened it up looks like 2 solders broke not sure where the hell they go. I need to see a pic of the airflow meter case shit without the black cover. anyone knows what im talkin about it would be very nice to see a pic.
It is below airbox, on square metal piece. cover is glued on, black, long half circle shape, need a close up to see where to resolder wire. Any help would be greatly appreciated Garrette |
87
Car is 87
|
get a new 86-88 afm from the junkyard or somewhere
|
Found a pic, there is no solder inside visible not sure as to y mine was soldered. Maybe jimmy rigged. no cash till friday, no other car till saturday
|
if its going to be hassle, I suggest pick-a-part. it maybe a 20 dollar part there but if you find a decent donor car theres a good chance it'll be in good working condition. I think. haha good luck man.
|
Is there no way to re solder the wires????
it worked just fine 3 hours ago, friend pulled on connector. mine is in working order, if i can see what needs to be reconnected |
got everything i need just not a good pic
|
i know exactly what your talking about, give me like 10 minutes ill get you a pic.
|
hope this works, it was hard to get it to focus
http://i7.photobucket.com/albums/y26...d/100_4152.jpg |
cool
Originally Posted by 88t2romad
i know exactly what your talking about, give me like 10 minutes ill get you a pic.
|
the three middle wires are those soldered to the board??? every thing looks good but it wont run. found broken solder with no home. car ran good earlier
|
yeah, the number (from left) 3, 4, and 5 are soldered, also the #5 one is soldered AND has a wire running off of it.
EDIT:make sure you have clean little blobs of solder, and it isnt bridging any other stuff inside the afm. |
Thanks alot for the help man, that told me what i needed to know, no one else knew what the hell i was talkin about. now i would be interested in knowing what the terminals actually do.
|
not a problem man, i can only guess what one fo them does. Did you get it running?
|
not yet damn soldering iron wont work. i wanted to cruise 2nite damn it
|
i bet i get it done before i pass out
|
if it had enough juice going through it to blow out a solder joint then the AFM is toast.
|
got pulled on, not electric, dumb freinds arm
|
hmmm, any luck then?
stupid kids, i smell smoke.... i hope they don't plan on burning my house down! |
nope, bad soldering gun. Fuck it i guess i go to junkyard
damn it...... |
The third from the left and the fifth from the left are the ground circuit. They are one and the same thing and should ohm out to each other much like touching both meter leads to each other. Like 0.000 ohms.
The first and second from the left are for the fuel pump Circuit Opening Relay. Just a open/close switch. The fourth from the left is the Vref from the ECU and should be approx 5vdc. The sixth from the left is the output of the afm to the ECU. The *wiper* if you will. The seventh is for the air temp sensor. That's in the fsm. You need to download one and take a look.......or just swap parts for the rest of your life. Your choice. |
All times are GMT -5. The time now is 12:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands