fmic installed working fine then...
i hit full boost then when i started to slow down by letting off the gas it just kept going and now everytime i push the clutch in it races to 3000-4000 rpm any ideas on wtf i did to it?
|
wierd tension on the throttle cable somewhere, possibly.
Unrelated but, With an rtek 1.7 isnt 720cc primarys and 750cc 2ndaries too much fuel? I thought that ecu was calibrated for 55o primary and 720cc secondaries. John ny |
i havent put the 750s in yet im waiting on my stand alone i didnt have enough room to add that into my sig lol
|
not a boost leak from the piping, but a vacum leak somewhere..
|
did you build your own piping for your fmic or is it a greddy kit
|
Either a snagged throttle cable (check for binding) or more likely you blew a vac hose off under boost and now have a really big vac leak. The leak will be after the throttle body, so look for hoses hooked to the upper or lower intake manifolds.
-b |
Stuck throttle cable.
|
turns out i messed up the welding on the bov and the throttle cable kinked, its all fixed now... after being towed home, ps its a greddy kit
|
All times are GMT -5. The time now is 12:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands