Flooding issue...please help.
I have an 88 se that has been sitting in my diveway for 2 weeks now. I ran fine when i first got it but started crapping out. If you let it sit too long after driving it it would flood and not start for like 2 hours. then it got worse and you had to let it sit for even longer.Now it doesn't start at all and acts like it floods out every time. WTF?
|
search!! this issue has been covered many many times, but, if u need help, IM me on AIM at POS AstroVan, i have had this problem before
|
search means go to 2nd gen archives
|
1 Attachment(s)
Click on photo for best results..
|
you may have an engine that is getting a little tired most guys install a fuel pump cut off switch to aide in starting.
how many miles are on your motor? does it smoke? could be a coolant issue as well |
Make a fuel cutoff switch. It's a short time fix, but it'll start each and every time .
Do an Advanced Search. Put the words FUEL CUT SWITCH in one block and put NZCONVERTIBLE in the other block. There will be at least one thread that will give you a detailed method for installing a switch. SEARCH is at the top of this page. Far right. |
Originally Posted by rotorforce
Click on photo for best results..
pull out plugs, check for signs of degradation. if yes, go for new set of plugs. |
All times are GMT -5. The time now is 11:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands