Firewall hoses and lines running along firewall
 

Hello again,

The final things I need to finish up involve the hoses coming from the firewall to the engine and a couple lines for fuel in/out.https://cimg1.ibsrv.net/gimg/www.rx7...c9834e8d4.jpeg
https://cimg4.ibsrv.net/gimg/www.rx7...35aa23a7a.jpeg
https://cimg6.ibsrv.net/gimg/www.rx7...0aaafa03d.jpeg

Ill update what I think the numbers are while I'm at work. Im running out the door now. Thanks again!

7. brake booster hardline. goes to hard pipe on lower intake manifold

3 and 4- charcoal canister lines, one is the oil breather line

5 and 6 - ac low and high pressure

9- boost/pressure sensor vacuum port- vacuum tube to boost sensor from here

11- line for bac valve air intake, goes into air intake and bac valve

10- o2 sensor, connects to a green connector under the upper intake manifold/dynamic chamber

16- line for stock oil breather setup

14- heater hose

12 and 13- fuel hard lines. the one that feeds into the fuel pulsation dampener goes to the fuel filter. the other one that goes to the fuel pressure regulator goes to a hardline on the firewall under the brake booster. on the left

15- is the intake air temp sensor connector

THANK YOU WAYNE!! I can smell the oil burning now! Thank you!! Ill post an update tomorrow when I start hooking it up