electrical problem after dash removal
 

I removed and installed the dash i wanted to remove some weight. I removed the a/c core the cruise controll box and the factory alarm box. The problem is when i plug in the ground terminal the horn comes on. So i unplugged them, then when i turn the lights on another horn goes off so i unplugged that. When i go to turn the key the four way flashers come on and the interior horn starts going off. I think i hooked everything up right i regrounded the 2 black wires that were attached to the dash. I've been searching and havn't found anything all that similar to this. Any help would be great

I gonna start the proccess of removing the dash again and checking the connections so far its the only think i can think of.

http://i80.photobucket.com/albums/j1...e/P1010030.jpg

Well if it works its a picture of 2 pluggins i couldn't figure out. Right now the radio isn't working and some of the warning lights come on like overheated exhaust and washer fuild light. When i wired the radio back up i used a normal ground i read somewhere that you need to use the harness ground but i'm not sure.

If anyone has any ideas please let me know. I'm a little stuck and i really don't want to take the dash out again.