ELECTRIC WINDOWS -Got no power!!!! Help please
 

I have chased the broken wire back to somewhere inbetween the Fuse box and the door loom plug ( found in the body just before the door ) I have tested the continuity between the main switch and that plug and its fine.

I need to run a new wire from the fuse box to the door loom plug.

The wire coming out of the fuse box is a thick white with yellow stripe wire. I was about to cut this 2-4 inches out of the fuse box and run a new wire to the plug but i see a few different thick white with yellow stripe wires. It is to hard to trace the wire thru to the plug due to the mass of wires and lack of space.

Does the power windows 30amp fuse feed anything other than the power windows? I dont want to cut it and then find its running something else i may need.

Thanks.

FYI this is a 87 T2 JAP SPEC RHD

the wire from the chassis loom plug that goes to the door loom is black with a white or yellow stripe. since the wire coming out of the fuse box is white and yellow it must change somewhere