RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   EGR valve (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/egr-valve-207230/)

shaolin_racer 07-20-03 05:17 PM

EGR valve
 
Does anyone know where I could purchase an EGR valve for less than $200 dollars?

So far I have contacted local Mazda dealership, Atkins rotary, and Mazdatrix. They all have the same price of $230, I was hoping to find one for less.

Is there anyway to check and EGR valve from a junkyard, or do I have to install it first and then check it with a vacuum pump?

Thanks in advance.

adrock3215 07-20-03 05:27 PM

I can sell you one. How much are you willing to pay?

shaolin_racer 07-21-03 07:08 PM

New or used?

shaolin_racer 07-21-03 07:21 PM

Don't really care either way, just to pass smog.
I am going to block it off after that

Raymr 07-21-03 08:25 PM

Here's what I did for my n/a. Pull out the EGR and clean out the passageways of soot and gunk. Get a tube of black 3M 5200 marine sealant and smear a film all over the leaky rubber diaphragm - use a skinny stick to get to all the spots. The idea is to seal it and make it air-tight. Then let it dry for a day or 2. Works great, as long as there's still enough rubber to put the adhesive on.


All times are GMT -5. The time now is 02:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands