ECU questions, immediate help!!!
 

I was going to install the S-AFC in my FC, when i took the ECU cover off, i looked into the plugs, there are three plugs. For the first two, it is same as described in the FSM (S4), but the third plug is smaller (less port) than what its showing in the FSM.
I have looked at the S5 ECU, but dook look the same either.
If i can remember right, the ECU model is N322, could someone tell me what ECU my FC has, and also could anyone tell me the ECU diagram so i can install the S-AFC.

thats the same ecu i have and i just followed the instructions in the safc book and it worked fine i didnt notice any differnt size plug

An N322 ECU should look like every other S4 ECU.

https://www.rx7club.com/attachment.p...hmentid=165722

Oops, my bad. I thought you said N332, which is US-spec S4 TII. This appears to be a Euro-spec car (it helps to know these things), in which case you CANNOT use an S-AFC. The S-AFC requires the ECU to use a 5V AFM, but yours is a 12V one. Sorry.

GOTCHA!!!

Been there and done the same thing in the past on questions about N322's. Europa thinger.