Do I need larger secondaries?
By the mods in my sig, do you think I sould get bigger secondaries?? My intake is still all apart from the porting, so I wanted to know now b4 I put it all back together. The porting is VERY conservative, probably only like 2-3mm out of each runner. But with intake and high flow exhaust I just wondered if I would be leaning out at all on higher rpms. These are all the mods that im doing, im selling the car, so future mods arent an issue. If I do, what size? Thanks.
|
Get an air/fuel ratio gauge. That will tell you everything (well, almost everything) you need to know. Autometer makes a fine A/F gauge for ~$50. If your injectors are relatively clean then it should be fine.
|
If you're selling the car, don't worry about it. 4x460cc is enough.
|
You shouldn't need larger injectors on a stock ported N/A motor. You could install an A/F gauge to make sure, but I doubt it.
|
All times are GMT -5. The time now is 10:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands