Do I have high oil presure or something?
 

I got my GXL running and I noticed that at 1000rpm the presure was near or at 60. Is this high or normal? I didn't notice it was that high on the GTU when I had it running.
Charles

"The normal oil pressure in a stock Mazda rotary is approximately 71 psi above 3,000 RPM, (110 psi above 3,000 RPM in the 1993-95 RX-7) and should never drop below 15 psi at idle (use a 0 to 125 psi gauge)."

-www.racingbeat.com, 2nd generation, Oil system, Temperature Adapter 1980-92;)

So I'm not running high?

That is what he said.

I seem to always run just under 60psi except at idle 15-30. It NEVER breaks 60psi. What is wrong with my oil pressure? Could it just be the gauge? Motor is less than 5000 mi

From ReTed's Site:

"The stock (rear) oil pressure regulator is designed to bypass at 60-65psi of oil pressure."

- http://fc3s-pro.com/TECH/MODS/ENGINE/OIL/opr.htm

O.K. which one is it? Racing beat says normal pressure is 71 psi, but the stock FC pressure regulator bypasses at 60-65.

Hm.

Edit: I run 58-60 at 3,000 rpm and about 25-30 at idle. Been doing that for as long as I can remember. I asked ReTed about it and he told me that's normal.

JB

71 PSI sounds just about right .. the regulator regulates it in the 60 range .. but its not perfect I little more than that creeps by. My N/A runs at right around 70 on the gauge at normal freeway driving 80-85 MPH 3500 ish RPM's