cutch problem?
hi all just wanted some help with a clutch problem. i had a hd clutch kit installed about 3 months ago new bearings the lot, but ive noticed recently (on really hot days after long periods of driving) my clutch pedal go's limp to either qtr or half way i thought master/slave cylinder but im not losing any clutch fluid. so i just wanted to know if they could still be the prob with out losing fluid?
|
sorry should have added that it only go's limp for 1-2 mins
|
master cylinder is bypassing likely.
try bleeding it just to be sure there is no air in the system, if it persists i would suspect the master cylinder is faulty if you are not losing any fluid. |
ok will do thanks :)
|
All times are GMT -5. The time now is 03:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands