rsross314 |
04-23-06 09:10 PM |
Cooling problem CONFUSED.
Sorry for anbouther coolent post but i did a search and found alot of help but now its different. Ok first it was blowing the coolent back into the overflow tank and then add coolent buzzer goes off and it heats up never taking the coolent from the tank. so i went on a search and replaced the radator cap and the cap where the themostate housing is. it blew the hose off going to the refil tank one day so i got a clamp for that and its been fine , then i checked for leaks flushed the system etc still same thing. so i read about the block seal and tried that yesterday. it worked fine alll night and then the next day i go out it runs under the half way mark and was fine for about an hour untill i came to a stop and 2 mins later after i started moving it shoots up and starts overheating and the buzzer goes off? The buzzer also will stop going off when you tach up to 2k or above when ideling. liek it will sound and as soon as you tach or rev to 2k rpms it just stops untill it drops back to idel. Its not flushing back into the overflow tank now though its just heating up and i see no leaks after alot of checks. also a new thermostat and i also tried running with no themostat. any ideas? and theres no smoke and no prob starting. Thanks
|