clutch master and slave cylinder
 

i am getting ready to install new master and slave cylinder and new soft hose.... wat should i look for to do this... and any helpful tips since ive nvr done this before. or does anyone have a diagram of the parts im changing or step by step process on how to do it? pictures would help a lot.... ive nvr done this exact thing before but bear with me... im pretty mechanically inclined so please any help would be greatly appreciated

i did this last weekend theres nothing to it its pretty simple, bleed new parts replace everything then bleed again.

do i just pump the clutch and it bleeds completely out?

Remove the oil filter -- you'll get slightly more room to get at the slave cylinder bolts.

The large end of the slave cylinder rod goes toward the clutch fork. If you reverse it, the narrow end of the rod will slip through the hole in the fork and you'll wonder why the clutch is still dead after ~1hr of bleeding the cylinder. :scratch: :lol:

Don't step on the clutch pedal while the slave cylinder is unbolted.